Description
Drying and heating oven FP260UL-120V is a forced-convection material test and drying oven designed for short drying times and fast heat-up performance up to 300 °C. Operating from +10 °C above ambient temperature to +300 °C, it achieves high temperature accuracy through APT.line™ technology. Adjustable fan speed plus controller functions for time-segment and real-time programming enable reliable control of temperature and circulating-air conditions over longer process cycles. The unit includes electromechanical exhaust-flap control, two chrome-plated shelves and an ergonomic handle design for convenient daily handling. Temperature safety is covered by a class 2 temperature selector limiter (DIN 12880) and a class 3.1 temperature selector monitor (DIN 12880), with optical or acoustic alarm selectable at the controller. A computer interface via Ethernet and an internal data logger with measured values readable in open format via USB support documentation and process monitoring. This larger FP-series model from manufacturer Binder is supplied for 120 V use and is suited to intensive drying, heating and materials-testing applications in professional laboratories.
This article is part of Drying ovens & climate chambers, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Temperature range: +10 °C above ambient to +300 °C
- Convection: Forced air (adjustable fan speed)
- Max. operating temperature: 300 °C
- Controller: Time-segment and real-time programming
- Interface: Ethernet and USB data logger
- Manufacturer: Binder
- UNSPSC: 41104501
- Interior dimensions: 650 × 512 × 780 mm (W × D × H)
- Exterior dimensions: 810 × 786 × 962 mm (W × D × H)
- Weight, empty: 82 kg
- Voltage: 240 V, 60 Hz
- Nominal power: 2.5 kW
- Temperature uniformity at 150 °C: ±1.7 K
- Temperature fluctuation at 150 °C: ±0.4 K
- Heating-up time to 150 °C: 19 min
- Recovery time after a 30 s door opening at 150 °C: 6 min
- Air change rate at 100 °C: 9 x/h
- Shelves, standard / maximum: 2/8
- Load per rack: 40 kg
- Permitted load: 270 kg
- Energy consumption at 100 °C: 275 Wh/h
- Energy consumption at 150 °C: 465 Wh/h
- Wall clearance, side: 100 mm
- Wall clearance, back: 160 mm
- Sound pressure level: 43 dB(A)
- Data Sheet:
Recently viewed
You may also like
Questions about Drying and heating chambers FP260UL-240V
What is this article?
Drying and heating chambers FP260UL-240V is the article on this page. Luminix Health distributes Binder for laboratory use. It sits in Drying ovens & climate chambers, inside Heating, drying & cooling, in Lab instruments.
A drying oven holds a temperature above ambient to drive off water or to condition a sample. A climate chamber also holds humidity. Uniformity across the chamber, not only the set point, decides whether two samples on different shelves saw the same conditions.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Drying ovens & climate chambers. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.