Description
Stainless steel test sieve Ø 150 x 50 mm with stainless steel analytical sieve cloth conforming to ISO 3310-1 enables accurate particle-size determination in laboratory and industrial quality control. The woven mesh offers a defined aperture of 6,3 mm, supporting reproducible fractionation of powders, granules and bulk solids. Constructed entirely from stainless steel, the frame and cloth combine mechanical strength with corrosion resistance for long service life under routine cleaning and handling. Measuring 150 mm in diameter and 50 mm in height, the sieve integrates readily into standard sieve stacks and mechanical shakers. It is supplied with a factory certificate 2.1 EN 10 225, providing documented manufacturing quality. This test sieve from manufacturer Linker is well suited to applications in pharmaceuticals, food analysis, chemicals, construction materials and research laboratories that require consistent mesh geometry. The ISO 3310-1 specification ensures controlled aperture tolerances for dependable analytical results. Available as a single piece for flexible laboratory inventory planning.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Material: Stainless steel
- Diameter: 150 mm
- Height: 50 mm
- Mesh size: 6,3 mm
- Standard: ISO 3310-1
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel test sieve Ø 150 x 50 mm, stainless steel test sieve cloth ISO 3310-1
What is this article?
Stainless steel test sieve Ø 150 x 50 mm, stainless steel test sieve cloth ISO 3310-1 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
