Description
Stainless steel test sieve Ø 203 (8'') × 50 mm with stainless steel test sieve mesh to ISO is a laboratory analytical sieve for particle-size determination across coarser aperture ranges. The frame has a diameter of 203 mm and a height of 50 mm in the established 8-inch format, with mesh apertures covering 26,5–125 mm according to the stated specification. Constructed entirely from stainless steel and manufactured to ISO 3310-1 mesh requirements, the sieve is supplied with a works certificate 2.1 EN 10 242 from manufacturer Linker for documented conformity in quality-control use. Corrosion-resistant stainless steel supports repeated dry-sieving cycles, cleaning and stacking on mechanical shakers. Typical applications include materials characterisation, pharmaceutical and food laboratory testing, and mineral or aggregate grading where apertures in the 26,5–125 mm range are required. Offered as a single piece, the unit integrates into multi-sieve stacks and helps laboratories maintain stable geometry and reproducible separation performance in analytical and research environments.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 203 mm (8'')
- Height: 50 mm
- Material: Stainless steel
- Mesh size: 26,5–125 mm
- Mesh standard: ISO 3310-1
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel test sieve Ø 203 (8'') x 50 mm, stainless steel sieve mesh ISO
What is this article?
Stainless steel test sieve Ø 203 (8'') x 50 mm, stainless steel sieve mesh ISO is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
