Description
Stainless steel test sieve Ø 305 (12'') × 55 mm is a precision analytical sieve for particle-size determination and sample fractionation. The frame measures 305 mm in diameter and 55 mm in height and is fabricated entirely from stainless steel, including the stainless steel test sieve mesh conforming to ISO 3310-1. The stated mesh aperture is 20 µm (0,02 mm), enabling fine separation steps in powder characterisation, quality control and materials testing. Each sieve is accompanied by a factory certificate 2.1 according to EN 10204, supporting documentation requirements in regulated laboratory environments. From manufacturer Linker, the unit is intended for single-piece laboratory use where durable metal construction and defined aperture size are essential. The stainless steel body resists corrosion under normal dry and wet sieving conditions and integrates with standard 305 mm sieve stacks. Suitable for mineral, pharmaceutical, food and industrial powder workflows that demand ISO-compliant mesh geometry and traceable works certification.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 305 mm (12'')
- Height: 55 mm
- Material: Stainless steel
- Mesh size: 0,02 mm (20 µm)
- Standard: ISO 3310-1
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel test sieve Ø 305 (12'') x 55 mm, stainless steel sieve mesh ISO
What is this article?
Stainless steel test sieve Ø 305 (12'') x 55 mm, stainless steel sieve mesh ISO is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.