Description
Stainless steel test sieve Ø 305 mm (12'') × 55 mm fitted with stainless steel analysis mesh to ISO 3310-1 supports accurate particle-size determination in laboratory environments. The mesh aperture of 450 µm (0,45 mm) allows consistent separation of solid samples during dry or wet sieving procedures. Measuring 305 mm in diameter and 55 mm in height, the frame provides a practical volume for routine analytical and quality-control work. Constructed entirely from stainless steel, the sieve combines mechanical strength with good corrosion resistance for long service life under frequent handling and cleaning. It is delivered with a factory certificate 2.1 EN 10 237, confirming conformity for traceable use. This unit from manufacturer Linker follows ISO 3310-1 requirements for mesh geometry and sieve dimensions, making it appropriate for powder characterisation, aggregate and bulk-solid grading, and general material classification. Clear specification of aperture and frame size assists laboratories in obtaining reproducible fractionation results across operators and sample series.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 305 mm
- Height: 55 mm
- Mesh size: 450 µm (0,45 mm)
- Material: Stainless steel
- Standard: ISO 3310-1
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel test sieve Ø 305 (12'') x 55 mm, stainless steel sieve mesh ISO
What is this article?
Stainless steel test sieve Ø 305 (12'') x 55 mm, stainless steel sieve mesh ISO is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.