Description
Stainless steel test sieve Ø 305 mm (12'') × 55 mm with stainless steel test sieve mesh conforming to ISO 3310-1 is intended for particle-size analysis and laboratory screening. The woven mesh has a defined aperture of 12,5 mm, supporting reproducible separation of powders, granules and bulk solids. The full stainless-steel construction of frame and cloth provides mechanical strength and corrosion resistance for repeated dry or wet sieving. With a diameter of 305 mm and a frame height of 55 mm, the sieve fits common analytical sieve stacks used in quality control. This analytical sieve from manufacturer Linker is supplied with a works certificate 2.1, giving documented production traceability for regulated workflows. ISO 3310-1 mesh geometry helps maintain consistent aperture shape across the screening surface. Typical applications include chemical, pharmaceutical, food, mineral and construction-materials laboratories that require durable, stackable test sieves. Offered as a single piece, it integrates readily into existing sieve sets for routine particle characterisation and process monitoring.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Mesh size: 12,5 mm
- Diameter: 305 mm
- Height: 55 mm
- Material: Stainless steel
- Sieve cloth standard: ISO 3310-1
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel test sieve Ø 305 (12'') x 55 mm, stainless steel sieve mesh ISO
What is this article?
Stainless steel test sieve Ø 305 (12'') x 55 mm, stainless steel sieve mesh ISO is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
