Description
Stainless steel test sieve Ø 50 x 25 mm with stainless steel analytical sieve mesh to ISO 3310-1 is intended for precise particle-size analysis in the laboratory. The woven mesh provides a defined aperture of 53 µm (0,053 mm), supporting consistent separation and classification of powders and granular materials. The compact frame has a diameter of 50 mm and a height of 25 mm, making it practical for small sample volumes and routine quality-control work. Constructed entirely from stainless steel, the sieve offers a durable, corrosion-resistant body suited to repeated laboratory handling and cleaning. Each unit is accompanied by a works certificate 2.1 EN 10 212 for documented conformity. This analytical sieve from manufacturer Linker is well suited to materials testing, pharmaceutical and food laboratories, and industrial quality assurance wherever ISO-compliant mesh geometry is required. The combination of defined aperture, stainless steel construction, and factory documentation supports traceable sieving workflows in standardized particle-sizing procedures.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Mesh size: 53 µm (0,053 mm)
- Diameter: 50 mm
- Height: 25 mm
- Material: Stainless steel
- Mesh standard: ISO 3310-1
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Stainless steel-analytical sieve Ø 50 x 25 mm, stainless steel analytical sieve mesh ISO 3310-1, with
What is this article?
Stainless steel-analytical sieve Ø 50 x 25 mm, stainless steel analytical sieve mesh ISO 3310-1, with is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
