Description
Stainless steel frame with identification number and factory certificate 2.1 EN 10 204 is a laboratory component for analysis sieve assemblies. It has a diameter of 200 mm and an inner height of 50 mm, and is fitted with a covering of perforated plates made from Fe. The plates use square perforation according to ISO 565/ISO 3310-2 with a mesh size of 63 mm, supporting defined aperture geometry for particle separation work. Manufactured from stainless steel, the frame is supplied with an identification number and a factory certificate 2.1 in accordance with EN 10 204, aiding traceability in documented sieving procedures. This single-piece unit from manufacturer Linker is intended for use in analytical sieving setups typical of quality control, materials testing, and research laboratories. The combination of stainless steel frame, Fe perforated-plate covering, standardised square perforation, and certified identification makes it suitable where reproducible sieve geometry and clear component documentation are required. Mesh size, diameter, and inner height are specified to match common analysis-sieve formats used in routine laboratory practice.
This article is part of Test sieves (wire mesh), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Material: Stainless steel
- Diameter: 200 mm
- Inner height: 50 mm
- Mesh size: 63 mm
- Covering: Perforated plates from Fe, square perforation ISO 565/ISO 3310-2
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Stainless steel frame, with identification number and inspection certificate 2.1 EN 10 204
What is this article?
Stainless steel frame, with identification number and inspection certificate 2.1 EN 10 204 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Test sieves (wire mesh), inside Test sieves & mills, in Lab instruments.
A wire-mesh test sieve sorts particles through a woven opening of a stated nominal size. The frame diameter and the mesh are the specification. A sieve without a certificate is a screen, not a measurement.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Test sieves (wire mesh). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (perforated plate), Mills, grinders & homogenisers, Sieve shakers and Sieve accessories (lids, pans, rings).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.