Description
Stainless steel frame with identification number and factory certificate 2.1 EN 10 204 is a laboratory sieve frame for analytical sieving. It is fitted with a covering of perforated plates made from Fe, using square perforation according to ISO 565/ISO 3310-2. The frame has a diameter of 300 mm and an internal height of 55 mm, with a defined mesh size of 7,1 mm for controlled particle separation. Built from stainless steel, the construction supports stable handling of the sieve media during routine analysis work. An identification number is provided together with a factory certificate 2.1 in accordance with EN 10 204, which assists documentation and traceability in quality-controlled environments. This configuration from manufacturer Linker is intended for analysis sieve setups where frame geometry, aperture size and material choice must remain clearly specified. The unit is offered as 1 piece and combines the stainless steel frame, Fe perforated-plate covering, square perforation to the stated ISO references, 300 mm diameter, 55 mm internal height and 7,1 mm mesh size in one matched assembly for laboratory particle-size workflows.
This article is part of Test sieves (wire mesh), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Material: Stainless steel
- Diameter: 300 mm
- Internal height: 55 mm
- Mesh size: 7,1 mm
- Covering: Perforated plates from Fe
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Stainless steel frame, with identification number and inspection certificate 2.1 EN 10 204
What is this article?
Stainless steel frame, with identification number and inspection certificate 2.1 EN 10 204 is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Test sieves (wire mesh), inside Test sieves & mills, in Lab instruments.
A wire-mesh test sieve sorts particles through a woven opening of a stated nominal size. The frame diameter and the mesh are the specification. A sieve without a certificate is a screen, not a measurement.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Test sieves (wire mesh). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (perforated plate), Mills, grinders & homogenisers, Sieve shakers and Sieve accessories (lids, pans, rings).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.