Incubator IF110plus, 108l, 20-80°C

Catalog nr. IF110plus
Memmert

Description

Incubator IF110plus is a forced-air laboratory incubator with a nominal volume of 108 l and a settable temperature range from +20 °C to +80 °C, corresponding to a working range of at least 10 °C above ambient up to +80 °C. TwinDISPLAY ControlCOCKPIT supports electronically adjustable exhaust air flap and fan speed, each from 0 % to 100 % in 10 % steps. The chamber is fitted with two grid shelves, an outer stainless steel door and an inner glass door. An Ethernet interface enables protocol data readout, programme transfer and online logging, complemented by a USB port on the ControlCOCKPIT for a USB stick. Multiple overtemperature protection, an integrated data logger with storage capacity for at least 10 years, and setting of three calibration values at the ControlCOCKPIT are provided, together with a factory calibration certificate for +37 °C. Structured stainless steel housing measures 745 × 864 × 584 mm; the stainless steel interior is 560 × 480 × 400 mm. Supply is 230 V, 50/60 Hz with maximum power consumption of approximately 1400 W. This incubator from manufacturer Memmert is suited to controlled incubation tasks in research and routine laboratories requiring forced convection and documented temperature performance.

This article is part of Incubators, in Heating, drying & cooling.

Key features

  • Pack size: 1 piece
  • Nominal volume: 108 l
  • Temperature range: +20 °C to +80 °C
  • Display: TwinDISPLAY
  • Interior dimensions: 560 × 480 × 400 mm
  • Housing dimensions: 745 × 864 × 584 mm
  • Manufacturer: Memmert
  • UNSPSC: 41104401
  • Working temperature range: at least 10 °C above ambient up to 80 °C
  • Setting temperature range: 20...80 °C
  • Exterior dimensions: 745 × 864 × 584 mm
  • Voltage: 230 V, 50/60 Hz
  • Power consumption: approx. 1400 W
  • Volume: 108 l
  • Technical Information Sheet: PDF

Recently viewed

You may also like

Questions about Incubator IF110plus, 108l, 20-80°C

What is this article?

Incubator IF110plus, 108l, 20-80°C is the article on this page. Luminix Health distributes Memmert for laboratory use. It sits in Incubators, inside Heating, drying & cooling, in Lab instruments.

An incubator holds the mild, even temperature a culture needs, often 25 °C or 37 °C, sometimes with carbon dioxide. It is not a drying oven. Uniformity and, for cells, the gas control are the specification. A flask of cells in a drying oven is a dead flask.

Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.

Which category should I open next?
What should I check before I order?

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?