Description
Constant climate chamber KBF 130 (E7) (120 V) is a standard KBF-series constant climate cabinet offering a wide temperature and humidity working range for laboratory stability and environmental testing. The chamber provides 127 L internal volume and is specified for 120 V 1~ 50/60 Hz supply, supporting UL-oriented laboratory installations. KBF units are intended for long-term, accelerated and stress-type climate tests where both temperature and relative humidity must be controlled with high reproducibility. Supplied as one piece with a net weight of 143 kg and a gross weight of 145 kg, the cabinet is manufactured in Germany by Binder for professional laboratory deployment. The 127 L format balances usable chamber space with a manageable footprint for pharmaceutical, materials and life-science applications that require documented climate conditions. This KBF 130 model suits ICH-oriented stability work, quality-control climate testing and research protocols that depend on a broad temperature–humidity envelope and consistent chamber performance under continuous laboratory operation.
This article is part of Drying ovens & climate chambers, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Internal volume: 127 L
- Electrical supply: 120 V 1~ 50/60 Hz
- Series: KBF
- Manufacturer: Binder
- Net weight: 143 kg
- Gross weight: 145 kg
- UNSPSC: 41104900
- Interior dimensions: 656 × 386 × 500 mm (W × D × H)
- Exterior dimensions: 900 × 710 × 1005 mm (W × D × H)
- Weight, empty: 126 kg
- Voltage: 120 V, 50/60 Hz
- Nominal power: 1.6 kW
- Temperature range: 0...70 °C
- Temperature range with humidity: 10...70 °C
- Temperature uniformity at 25 °C and 60% RH: ±0.2 K
- Temperature uniformity at 40 °C and 75% RH: ±0.2 K
- Temperature fluctuation at 25 °C and 60% RH: ±0.1 K
- Temperature fluctuation at 40 °C and 75% RH: ±0.1 K
- Recovery time after a 30 s door opening at 25 °C and 60% RH: 2 min
- Recovery time after a 30 s door opening at 40 °C and 75% RH: 3 min
- Humidity range: 10...80 % RH
- Humidity fluctuation at 25 °C and 60% RH: ±1.5 % RH
- Humidity fluctuation at 40 °C and 75% RH: ±1.5 % RH
- Max. heat compensation at 40 °C: 270 W
- Inner doors: 1
- Shelves, standard / maximum: 2/6
- Load per rack: 30 kg
- Permitted load: 150 kg
- Energy consumption at 25 °C and 60% RH: 255 Wh/h
- Energy consumption at 40 °C and 75% RH: 295 Wh/h
- Wall clearance, side: 100 mm
- Wall clearance, back: 100 mm
- Sound pressure level at 25 °C and 60% RH: 47 dB(A)
- Data Sheet:
Recently viewed
You may also like
Questions about KBF 130 (E7) (120V)
What is this article?
KBF 130 (E7) (120V) is the article on this page. Luminix Health distributes Binder for laboratory use. It sits in Drying ovens & climate chambers, inside Heating, drying & cooling, in Lab instruments.
A drying oven holds a temperature above ambient to drive off water or to condition a sample. A climate chamber also holds humidity. Uniformity across the chamber, not only the set point, decides whether two samples on different shelves saw the same conditions.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Drying ovens & climate chambers. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.