Description
LINKER analytical sieve Ø 200 mm is a laboratory test sieve with a stainless steel frame and an internal height of 50 mm, intended for particle size analysis and fractionation. The sieve is fitted with nylon sieve cloth conforming to DIN 4197 and a mesh size of 140 µm (0,14 mm), supporting consistent separation of powders and granular materials in quality-control and research workflows. Each unit is supplied with an identification number and a works certificate 2.1 according to EN 10204 from manufacturer Linker, aiding traceability in documented laboratory procedures. The stainless steel frame maintains dimensional stability during stacking and repeated sieving cycles, while the nylon mesh provides a defined aperture suited to many aqueous and organic sample preparations. With a diameter of 200 mm and a pack size of one piece, the sieve fits standard 200 mm analytical sieve stacks used in materials testing, pharmaceuticals and industrial particle characterisation. Clear mesh geometry and robust frame construction help ensure reliable sample recovery after separation and support routine particle-size determination where certified mesh aperture is required.
This article is part of Test sieves (wire mesh), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 200 mm
- Internal height: 50 mm
- Mesh size: 140 µm (0,14 mm)
- Cloth: Nylon sieve cloth DIN 4197
- Frame material: Stainless steel
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about LINKER analytical sieve Ø 200 mm, stainless steel frame, internal height 50 mm, nylon mesh 140 µm
What is this article?
LINKER analytical sieve Ø 200 mm, stainless steel frame, internal height 50 mm, nylon mesh 140 µm is the article on this page. Luminix Health distributes Linker for laboratory use. It sits in Test sieves (wire mesh), inside Test sieves & mills, in Lab instruments.
A wire-mesh test sieve sorts particles through a woven opening of a stated nominal size. The frame diameter and the mesh are the specification. A sieve without a certificate is a screen, not a measurement.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Test sieves (wire mesh). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (perforated plate), Mills, grinders & homogenisers, Sieve shakers and Sieve accessories (lids, pans, rings).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
