Description
MF 4.0 sieve with a hole diameter of Ø 4,0 mm is a replaceable sieve insert for grinding heads that ensures a defined upper limit on particle size. Fabricated from stainless steel material 1.4301, it delivers durable performance in routine milling and sample-preparation work. Circular perforations of 4,0 mm diameter provide consistent grain-size control when processing solid materials. Supplied as a single piece, this accessory from manufacturer IKA fits compatible mill heads and can be exchanged to match different particle-size targets. With a net weight of only 0,033 kg the component is light and straightforward to install or remove between runs. Laboratories rely on interchangeable sieves of this type whenever reproducible particle-size distribution is required for subsequent analytical or processing steps. The corrosion-resistant 1.4301 steel withstands typical laboratory conditions and repeated cleaning cycles. Whether used for coarse pre-grinding or intermediate size-reduction stages, the MF 4.0 sieve supports controlled, reproducible milling results across a range of solid samples.
This article is part of Test sieves (wire mesh), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Storage temperature: 5–40 °C
- Hole size: Ø 4,0 mm
- Material: 1,4301
- Type: Replaceable sieve for grinding heads
- EAN: 4053411010607
- Technical Information Sheet:
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about MF 4.0, Sieve, Ø4 mm
What is this article?
MF 4.0, Sieve, Ø4 mm is the article on this page. Luminix Health distributes IKA for laboratory use. It sits in Test sieves (wire mesh), inside Test sieves & mills, in Lab instruments.
A wire-mesh test sieve sorts particles through a woven opening of a stated nominal size. The frame diameter and the mesh are the specification. A sieve without a certificate is a screen, not a measurement.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Test sieves (wire mesh). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (perforated plate), Mills, grinders & homogenisers, Sieve shakers and Sieve accessories (lids, pans, rings).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.