Description
MK 400 (E6) (400 V/50 Hz) is a dynamic climate chamber from the MK series for applications that demand rapid temperature changes in a larger working volume. The standard model offers an interior capacity of 417 L, accommodating bulkier samples, multiple test loads or fixtures under alternating climatic conditions. Power supply is specified as 400 V, 3~/N/PE, 50 Hz, aligned with three-phase laboratory and industrial installations. Typical use includes temperature-cycling and environmental stress testing where fast transitions and controlled climate sequences are required. This configuration is supplied from manufacturer Binder as part of the MK series of alternating climate chambers for rapid temperature change. The appliance is provided as one complete unit, with a net weight of 465 kg and a gross weight of 467 kg. Originating from Germany (Baden-Württemberg), the MK 400 (E6) follows the MK400CO2-400V standard specification and serves professional test and laboratory settings that need expanded dynamic climate-chamber volume on a 400 V, 50 Hz three-phase supply within the established MK product family.
This article is part of Drying ovens & climate chambers, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Product type: Dynamic climate chamber
- Series: MK
- Interior volume: 417 L
- Power supply: 400 V 3~/N/PE 50 Hz
- Manufacturer: Binder
- Net weight: 465 kg
- UNSPSC: 41104900
- Interior dimensions: 735 × 810 × 700 mm (W × D × H)
- Exterior dimensions: 1115 × 1400 × 1710 mm (W × D × H)
- Weight, empty: 380 kg
- Voltage: 400 V, 50 Hz
- Nominal power: 6.8 kW
- Temperature range: -50...180 °C
- Temperature uniformity, depending on setpoint: ±0.1...±1 K
- Temperature fluctuation, depending on setpoint: ±0.1...±0.4 K
- Average heating-up rate between -40 °C and 180 °C: 5.7 K/min
- Cooling-down time from 180 °C to -40 °C: 80 min
- Average cooling-down time between 180 °C and -40 °C: 5 K/min
- Shelves, standard / maximum: 1/6
- Load per rack: 30 kg
- Permitted load: 150 kg
- Energy consumption at 25 °C: 1200 Wh/h
- Wall clearance, side: 200 mm
- Wall clearance, back: 300 mm
- Sound pressure level: 62 dB(A)
- Data Sheet:
Recently viewed
You may also like
Questions about MK 400 CO2 (E6) (400V/50Hz)
What is this article?
MK 400 CO2 (E6) (400V/50Hz) is the article on this page. Luminix Health distributes Binder for laboratory use. It sits in Drying ovens & climate chambers, inside Heating, drying & cooling, in Lab instruments.
A drying oven holds a temperature above ambient to drive off water or to condition a sample. A climate chamber also holds humidity. Uniformity across the chamber, not only the set point, decides whether two samples on different shelves saw the same conditions.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Drying ovens & climate chambers. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.