Description
NEXOPART test sieve 200 LS-N with stainless steel frame 203 × 28 mm is a precision test sieve for laboratory particle-size analysis. It incorporates stainless steel metal wire mesh with a mesh width of 0,025 mm and is produced to ASTM E11 as ASTM No. 500. The stainless steel frame has a diameter of 203 mm and a height of 28 mm, ensuring a durable, corrosion-resistant structure for everyday analytical work. Both frame and wire cloth are stainless steel, supporting long service life during dry or wet sieving of fine powders and granular materials. Supplied as one piece, the 200 LS-N sieve is designed for standardised fractionation where a 0,025 mm aperture according to ASTM E11 is specified. This analytical sieve from manufacturer NEXOPART is intended for particle characterisation in chemical, pharmaceutical, food and materials testing laboratories. Accurate mesh geometry and the rigid 203 × 28 mm frame help achieve reproducible separation cuts and reliable sieve-analysis results across successive test runs.
This article is part of Test sieves (wire mesh), in Test sieves & mills.
Key features
- Pack size: 1 pc
- Diameter: 203 mm
- Height: 28 mm
- Material: Stainless steel
- Mesh width: 0,025 mm
- Wire mesh: Stainless steel metal wire cloth
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about NEXOPART Test Sieve 200 LS-N with stainless steel frame 203x28 mm- with
What is this article?
NEXOPART Test Sieve 200 LS-N with stainless steel frame 203x28 mm- with is the article on this page. Luminix Health distributes NEXOPART for laboratory use. It sits in Test sieves (wire mesh), inside Test sieves & mills, in Lab instruments.
A wire-mesh test sieve sorts particles through a woven opening of a stated nominal size. The frame diameter and the mesh are the specification. A sieve without a certificate is a screen, not a measurement.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Test sieves (wire mesh). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (perforated plate), Mills, grinders & homogenisers, Sieve shakers and Sieve accessories (lids, pans, rings).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across the EU, two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
