Description
Buffered acetone solution is a ready-to-use analytical reagent prepared according to Reag. Ph. Eur. 4.1.3 (4000100) for pharmacopoeial and laboratory analytical work. The solution is supplied in a 1 l glass pack for convenient handling at the bench and in quality-control workflows. Physical data include a density of approximately 0,9 g/cm³, a flash point of −17 °C and a boiling point of 56,05 °C; the material is classified under UN number 1993. These properties support correct storage, transport awareness and safe use in controlled laboratory environments. The buffered acetone preparation from manufacturer Carl ROTH is intended for applications that call for Ph. Eur. 4.1.3 reagent quality within analytical chemistry and special buffer-solution protocols. It suits laboratories performing pharmacopoeial tests and related analytical procedures where a defined buffered acetone medium is required. Use appropriate flammable-liquid handling practice given the low flash point, and consult the accompanying safety documentation before use in routine or regulated analytical settings.
This article is part of Buffers (other), in Buffers & pH solutions.
Key features
- Pack size: 1 l glass
- Density: ~0,9 g/cm³
- Flash point: −17 °C
- Boiling point: 56,05 °C
- Grade: Reag. Ph. Eur. 4.1.3
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information
DangerHazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Buffered acetone solution, Reag. Ph. Eur. 4.1.3, 4000100, 1 l, glass
What is this article?
Buffered acetone solution, Reag. Ph. Eur. 4.1.3, 4000100, 1 l, glass is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Buffers (other), inside Buffers & pH solutions, in Lab chemicals.
These are buffer solutions and salts that are not a pH calibration standard and not a named biological buffer. The pH, the concentration and the identity of the ions are the specification. A buffer has a capacity. Diluted too far, it is only salty water.
A buffer resists a change in pH when a little acid or base is added. It does that because a weak acid and its conjugate base are both present. A pH buffer used to calibrate a meter has a stated value at a stated temperature. A biological buffer such as Tris or HEPES is chosen because it holds the pH of a living system and does not poison it. Conductivity standards are the sister articles for a conductivity meter. The ions are on PubChem. Electrode calibration practice sits with EURAMET and BELAC.
Which category should I open next?
The category is Buffers & pH solutions. The sub-category is Buffers (other). The catalogue is Lab chemicals.
Shelves beside this one are pH buffers & conductivity standards and Biological buffers (Tris, HEPES, MOPS).
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within two to five working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
