Description
Acetone ROTIPURAN® min. 99,7 %, p.a. is a high-purity analytical solvent supplied for laboratory use where consistent quality is required. The product has the empirical formula C₃H₆O, CAS number 67-64-1 and EG nr. 200-662-2, with a molar mass of 58,08 g/mol. Physical data include a density of 0,79 g/cm³, a flash point of −17 °C and a boiling point of 56,05 °C, supporting correct handling and process planning in analytical and preparative work. Acetone of this purity is commonly selected for cleaning, sample preparation and general solvent duties where a defined minimum assay of 99,7 % is specified. Available from manufacturer Carl ROTH under the ROTIPURAN® p.a. line, suits routine bench supply and controlled dispensing. Laboratories can rely on the stated identity, assay and physicochemical parameters when documenting methods, preparing reagents or specifying solvents for analytical workflows that call for acetone of defined purity.
This article is part of 3D printers, accessories & spare parts, in 3D printing & bioprinting.
Key features
- Assay: ≥99.7 %
- Refractive index (20 °C): 1.358-1.360
- Density (20 °C): 0.790-0.794
- Evaporation residue: ≤0.001 %
- Water: ≤0.5 %
- Al (Aluminium): ≤0.00005 %
- B (Boron): ≤0.00005 %
- Ba (Barium): ≤0.00005 %
- Ca (Calcium): ≤0.00005 %
- Cd (Cadmium): ≤0.000005 %
- CAS number: 67-64-1
- Pack sizes: 1 l, 2.5 l, 5 l, 10 l, 25 l
- EG nr.: 200-662-2
- Purity: min. 99,7 %, p.a.
- Molar mass: 58,08 g/mol
- Density: 0,79 g/cm³
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information
Danger
Hazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Browse related categories
Category
Sub-category
3D printers, accessories & spare parts
Catalogue
Brand
Questions about Acetone, ROTIPURAN® min. 99,7 %, p.a., 1 l, glass
What is this article?
Acetone, ROTIPURAN® min. 99,7 %, p.a., 1 l, glass is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in 3D printers, accessories & spare parts, inside 3D printing & bioprinting, in Lab instruments.
These are the printers themselves and the nozzles, beds and build plates that wear out. Nozzle diameter decides detail against speed. A spare nozzle for a different extruder thread does not fit. The printer's build volume is the largest object it can make.
A laboratory 3D printer builds a solid from a filament or a resin, layer by layer, when a shape is needed and a catalogue part does not exist. Bioprinting uses a bioink that contains, or will contain, living cells. The material decides the chemistry of the object and whether a cell will tolerate it. A filament that is only described as plastic is not a specification. Cell work around bioinks is discussed in the WHO biosafety topic and the papers are on PubMed.
Which category should I open next?
The category is 3D printing & bioprinting. The sub-category is 3D printers, accessories & spare parts. The catalogue is Lab instruments.
Shelves beside this one are 3D printer filaments & resins and Bioinks & bioprinting materials.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.