Buffer MW1 (35 mL)

Catalog nr. 74097435

Available

Macherey-Nagel

Price:
Sale price€38,00
Ask quote for bulk order

Description

Buffer MW1 is a wash buffer supplied in a 35 ml bottle for laboratory purification workflows in biochromatography and nucleic-acid isolation. Designated Wash Buffer MW1, it is used in intermediate wash steps that remove contaminants while retaining target nucleic acids on the binding matrix. The ready-to-use liquid presentation supports reproducible washing conditions and straightforward reagent handling at the bench. This buffer from manufacturer Macherey-Nagel complements silica-membrane and related purification formats commonly applied in molecular biology. With a net weight of 0,08 kg and compact outer dimensions, the unit fits standard laboratory storage without excess bulk. Transport classification references UN 1993 as a flammable liquid mixture, and hazard labelling carries the signal word Danger with corresponding H- and P-statements; users must consult the safety data and apply appropriate controls for flammable and corrosive materials. Laboratories can deploy Buffer MW1 for kit replenishment, method optimisation or routine sample batches in research and analytical settings where a dedicated wash buffer is required within established extraction protocols.

This article is part of Sorbents, silica gel & ion exchangers, in SPE & sample preparation.

Key features

  • Pack size: 35 ml bottle
  • Storage temperature: 18 - 25 °C
  • Product type: Wash Buffer MW1
  • EAN: 4046681155284
  • Technical Information Sheet: PDF
  • Safety Data Sheet: PDF

Compliance & Safety Information

GHS02, flammableGHS05, corrosiveDanger

Hazard Statements (H-Phrases)

H226Flammable liquid and vapour. H314Causes severe skin burns and eye damage.

Precautionary Statements (P-Phrases)

P210Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233Keep container tightly closed. P240Ground and bond container and receiving equipment. P241Use explosion-proof [electrical/ventilating/lighting] equipment. P242Use non-sparking tools. P243Take action to prevent static discharges. P260shDo not breathe dust/fume/gas/mist/vapours/spray. P264Wash thoroughly after handling. P280Wear protective gloves/protective clothing/eye protection/face protection. P280shWear protective gloves/protective clothing/eye protection/face protection. P301+P330+P331IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303+P361+P353IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310Immediately call a POISON CENTER/doctor. P363Wash contaminated clothing before reuse. P370+P378In case of fire: Use to extinguish. P403+P235Store in a well-ventilated place. Keep cool. P405Store locked up. P501Dispose of contents/container to.

Recently viewed

You may also like

Questions about Buffer MW1 (35 mL)

What is this article?

Buffer MW1 (35 mL) is the article on this page. Luminix Health distributes Macherey-Nagel for laboratory use. It sits in Sorbents, silica gel & ion exchangers, inside SPE & sample preparation, in Chromatography equipment.

Loose sorbent, silica gel and ion-exchange resin are the phases bought in bulk to pack a column or to stir into a solution. Particle size and activity, or the ion-exchange capacity, are the specification. A TLC silica and a flash silica of different particle sizes are not the same separation.

Solid-phase extraction holds a compound on a sorbent while the rest of the sample is washed away, then releases it in a small volume. The sorbent, the bed mass and the solvents are the method. Silica, ion exchangers and polymer phases do different jobs. A flash column is the same idea scaled toward purification rather than trace cleanup. The molecules are on PubChem, named by IUPAC.

Which category should I open next?
What should I check before I order?

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?