Description
Calibration certificate temperature and humidity documents controlled climatic performance for laboratory chambers and stability equipment. The certificate covers measurement in the centre of the usable space at 25 °C and 60 % relative humidity, or at customer-specified test values when alternative setpoints are required for a given protocol. This service supports qualification, routine verification and audit-ready traceability of temperature and humidity control in pharmaceutical, biotech and materials laboratories. Issued for Binder climate and environmental chambers, the certificate confirms that the working-space centre meets the stated climatic conditions under defined test parameters. It is supplied as a single piece and is intended for laboratories that must demonstrate compliance with internal SOPs or external quality systems. Use the certificate to record baseline performance after installation, after relocation, or as part of periodic recalibration programmes. Clear reporting of the measurement location and the applied setpoints helps quality teams compare results across instruments and over time, supporting consistent documentation of chamber suitability for stability, incubation and controlled-environment work.
This article is part of Hygrometers & humidity meters, in Temperature measurement.
Key features
- Pack size: 1 pc
- Product type: Calibration certificate temperature and humidity
- Measurement location: Centre of usable space
- Standard test conditions: 25 °C / 60 % r.H.
- Alternative conditions: Customer-specified test values
Recently viewed
You may also like
Questions about Calibration certificate
What is this article?
Calibration certificate is the article on this page. Luminix Health distributes Binder for laboratory use. It sits in Temperature measurement accessories, inside Temperature measurement, in Lab instruments.
These are the connectors, the wells and the spare probes that complete a thermometer or a logger. A thermocouple connector of the wrong type silently adds an error. The accessory has to be the same sensor family as the meter.
A thermometer reports a temperature. A liquid-in-glass thermometer is a calibrated column. A digital thermometer is a sensor and a display, and the sensor, not the display, is what is calibrated. An infrared thermometer reads a surface and depends on emissivity. A data logger stores the reading over time. Without a stated uncertainty and a calibration point, the number is only an indication. The scale is maintained by the BIPM and compared by EURAMET. Accreditation is BELAC.
Which category should I open next?
The category is Temperature measurement. The sub-category is Temperature measurement accessories. The catalogue is Lab instruments.
Shelves beside this one are Laboratory glass thermometers, Temperature probes & sensors, Hygrometers & humidity meters, Data loggers, Digital thermometers and Infrared thermometers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
