Description
The FLW2506 recirculating cooler in tall design is a water-cooled mid-range unit developed for laboratory temperature control where higher cooling capacity and powerful circulation are essential. It features a durable immersion pump and an integrated stainless steel bath vessel with fill volumes up to 30 litres for stable continuous-duty operation. Precise microprocessor PID control, a large luminous LED temperature readout and splash-protected membrane keypads ensure straightforward, accurate daily use. Permissible return temperature reaches +80 °C; filling is performed conveniently from above through a hinged opening, while low-level protection supplies optical and acoustic warnings. An easily reached front drain valve, placement side by side without side ventilation slots, RS232 interface, pump pressure display and potential-free alarm output (max. 30 VA) complete the working package; IP class is 21 according to IEC 60529. Cooling capacity figures are determined to DIN 12876 at 20 °C ambient and may vary with the tempering fluid. This upright FLW model from manufacturer Julabo supports demanding recirculating cooling duties in research and technical environments with a compact footprint.
This article is part of Circulators, chillers & thermostats, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Cooling type: Water-cooled (FLW)
- Bath vessel: Stainless steel, up to 30 l
- Pump type: Immersion pump
- Max. return temperature: +80 °C
- IP protection class: 21 (IEC 60529)
Recently viewed
You may also like
Questions about FLW2506 Recirculating cooler
What is this article?
FLW2506 Recirculating cooler is the article on this page. Luminix Health distributes Julabo for laboratory use. It sits in Circulators, chillers & thermostats, inside Heating, drying & cooling, in Lab instruments.
A circulator or thermostat holds a bath liquid at a set temperature and pumps it through a jacket. A chiller is the same idea aimed below ambient. The temperature range, the cooling power and the pump flow are the three numbers. The fluid has to match the range.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Circulators, chillers & thermostats. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Drying ovens & climate chambers, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within two to five working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
