Methanol, ROTISOLV® min. 99,9 %, Pestilyse® plus, 2.5 l, glass

Catalog nr. 7583.1

Available

Carl Roth

Volume: 2.5 liter
Value Packs: 1 piece
Price:
Sale price€63,35
Ask quote for bulk order

Description

Methanol ROTISOLV® min. 99,9 % Pestilyse® plus is a high-purity solvent with the formula CH₃OH, CAS number 67-56-1 and EG number 200-659-6. It has a molar mass of 32,04 g/mol and a density of 0,79 g/cm³, with a boiling point of 65 °C and a flash point of 9,7 °C. This Pestilyse® plus quality is intended for chromatographic applications and gas chromatography where tightly controlled solvent purity is specified. Supplied in a 2,5 l glass bottle, the product supports laboratory solvent handling, elution and sample preparation. Physical parameters including density and boiling point aid method development for GC and related chromatographic work. Available from manufacturer Carl ROTH within the ROTISOLV® portfolio, the material addresses analytical solvent needs in research and routine laboratories. Transport classification references UN number 1230 for this flammable liquid. Laboratories can integrate the methanol into workflows that require min. 99,9 % assay for chromatographic reliability. Documented molar mass, density and thermal data support consistent solvent selection and reproducible analytical practice across diverse laboratory applications.

This article is part of HPLC & LC-MS grade solvents, in Solvents. See also Analytical grade solvents (p.a.).

Key features

  • Assay (GC): ≥99,9 %
  • Colour (APHA): ≤10
  • Water (KF): ≤0,05 %
  • Free acid (as CH3COOH): ≤0,002 %
  • Free alkali (as NH3): ≤0,0002 %
  • Evaporation residue: ≤0,0002 %
  • GC/FID suitability (as 2-octanol): ≤10 ng/ml
  • GC/ECD suitability (as heptachloro epoxide): ≤10 ng/l
  • GC/ECD dioxins, furans and PCBs (as lindane): ≤5 ng/l
  • GC/ECD pesticides (as lindane): ≤5 ng/l
  • CAS number: 67-56-1
  • Pack size: 2,5 l glass
  • EG nr.: 200-659-6
  • Molar mass: 32,04 g/mol
  • Density: 0,79 g/cm³
  • Technical Information Sheet: PDF
  • Safety Data Sheet: PDF

Compliance & Safety Information

GHS02, flammableGHS06, toxicGHS08, health hazardDanger

Hazard Statements (H-Phrases)

H225Highly flammable liquid and vapour. H301+H311+H331Toxic if swallowed, in contact with skin or if inhaled. H370Causes damage to organs.

Precautionary Statements (P-Phrases)

P210Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P270Do not eat, drink or smoke when using this product. P280Wear protective gloves/protective clothing/eye protection/face protection. P303+P361+P353IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340IF INHALED: Remove person to fresh air and keep comfortable for breathing. P308+P311IF exposed or concerned: Call a POISON CENTER/doctor.

Recently viewed

You may also like

Questions about Methanol, ROTISOLV® min. 99,9 %, Pestilyse® plus, 2.5 l, glass

What is this article?

Methanol, ROTISOLV® min. 99,9 %, Pestilyse® plus, 2.5 l, glass is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in HPLC & LC-MS grade solvents, inside Solvents, in Lab chemicals.

HPLC grade limits the absorbance and the residue that would appear as peaks or baseline drift. LC-MS grade goes further on metal ions and on particles that would suppress a mass spectrum. A solvent that is only analytical grade is a false economy on an LC-MS system.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?