Description
Solid rubber stopper with an upper diameter of 49 mm, a lower diameter of 41 mm and a length of 40 mm is a tapered laboratory stopper for sealing larger flask and bottle necks. Produced from rubber in a solid, unbored form, it offers a reliable mechanical closure without a channel for tubing. The conical geometry—49 mm at the top narrowing to 41 mm at the base over 40 mm length—suits openings in this size range and supports standard sealing work in chemical, analytical and teaching environments. Net weight is 0,061 kg. Supplied as 1 piece from manufacturer Witeg, this gum stopper fits the established rubber-stopper category used for vessel closure, temporary containment of samples or reagents, and everyday lab organisation. Solid construction and clearly specified diameters make it a practical consumable when a sturdy, non-bored rubber plug is required for consistent sealing of medium to larger laboratory glassware necks.
This article is part of Rubber & silicone stoppers, in Stoppers, caps & closures.
Key features
- Pack size: 1 pc
- Material: Rubber
- Design: Solid (unbored)
- Upper diameter: 49 mm
- Lower diameter: 41 mm
- Length: 40 mm
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Rubber stoppers solid
What is this article?
Rubber stoppers solid is the article on this page. Luminix Health distributes Witeg for laboratory use. It sits in Rubber & silicone stoppers, inside Stoppers, caps & closures, in Labware.
A rubber or silicone stopper is pushed into a mouth. The size number corresponds to a top and bottom diameter. Silicone survives higher temperatures and more autoclave cycles. Natural rubber is attacked by oils and by some solvents.
A closure is the part that decides whether a bottle stays shut and whether the contents attack the seal. A ground-glass stopper matches a ground neck. A screw cap needs the right thread and a liner that survives the liquid. Rubber and silicone stoppers push into a mouth. The liner, not the colour of the cap, is the chemical choice. The vessels they close are indexed under ISO laboratory glassware.
Which category should I open next?
The category is Stoppers, caps & closures. The sub-category is Rubber & silicone stoppers. The catalogue is Labware.
Shelves beside this one are Screw caps & closures, Ground-joint glass stoppers, Lids & seals and Closures (other).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.





















