Description
Sulphate buffer solution pH 2.0 is a ready-to-use analytical buffer specified as Reag. Ph. Eur. 4.1.3 for laboratory applications that require a defined acidic sulphate system at pH 2.0. Density is approximately 1 g/cm³ and the boiling point is 100 °C, consistent with dilute aqueous buffer media under ordinary laboratory conditions. The product is supplied in a 1 l plastic pack for routine pH control and reference procedures aligned with European Pharmacopoeia chapter 4.1.3. This preparation from manufacturer Carl ROTH is positioned among special pH-buffer solutions for analytical chemistry where a stable sulphate-based pH 2.0 medium is needed. Source information lists designation 4008900 and notes UN number 1760. Unit quantity is 1 liter, with a stated pack weight of 1,300 kg to support clear logistics and bench handling. Analytical and pharmacopoeia-related laboratories can integrate this sulphate buffer wherever controlled acidity at pH 2.0 is required. Physical characteristics match those of typical dilute aqueous buffers, supporting reliable use in controlled laboratory settings.
This article is part of pH buffers & conductivity standards, in Buffers & pH solutions.
Key features
Compliance & Safety Information
WarningHazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Questions about Sulphate buffer solution pH 2.0, Reag. Ph. Eur. 4.1.3, 4008900, 1 l, plastic
What is this article?
Sulphate buffer solution pH 2.0, Reag. Ph. Eur. 4.1.3, 4008900, 1 l, plastic is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in pH buffers & conductivity standards, inside Buffers & pH solutions, in Lab chemicals.
A pH buffer for calibration has a stated pH at a stated temperature, often traceable. A conductivity standard has a stated conductivity. They are not general reagents and they should not be poured back into the bottle. The temperature of the measurement has to be the temperature on the label, or the meter has to compensate.
A buffer resists a change in pH when a little acid or base is added. It does that because a weak acid and its conjugate base are both present. A pH buffer used to calibrate a meter has a stated value at a stated temperature. A biological buffer such as Tris or HEPES is chosen because it holds the pH of a living system and does not poison it. Conductivity standards are the sister articles for a conductivity meter. The ions are on PubChem. Electrode calibration practice sits with EURAMET and BELAC.
Which category should I open next?
The category is Buffers & pH solutions. The sub-category is pH buffers & conductivity standards. The catalogue is Lab chemicals.
Shelves beside this one are Biological buffers (Tris, HEPES, MOPS) and Buffers (other).
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.




















