Description
Thioacetamide is a p.a. grade analytical reagent with a minimum purity of 99 %, Identified by CAS number 62-55-5 and EG number 200-541-4, it has the empirical formula C₂H₅NS and a molar mass of 75,13 g/mol. Density is reported as 1,37 g/cm³, supporting accurate preparation and handling in the laboratory. This thioacetamide from manufacturer Carl ROTH is positioned for qualitative analytical work, including cation detection and related wet-chemical procedures where a reliable sulphur-containing reagent is required. The p.a. specification suits demanding analytical environments that need consistent identity and assay data. size is practical for routine reagent preparation without excessive inventory. Laboratories engaged in inorganic qualitative analysis, teaching practicals and method support can integrate this material into established detection schemes while relying on the stated molar mass, density and purity figures for documentation and solution calculations.
This article is part of Analytical grade solvents (p.a.), in Solvents.
Key features
- Assay: ≥99,0 %
- Sulphated ash: ≤0,05 %
- Iron (Fe): ≤0,0005 %
- Heavy metals (as Pb): ≤0,001 %
- CAS number: 62-55-5
- Pack sizes: 50 g, 100 g, 250 g, 500 g
- EG nr.: 200-541-4
- Purity: min. 99 %, p.a.
- Empirical formula: C₂H₅NS
- Molar mass: 75,13 g/mol
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information
DangerHazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Questions about Thioacetamide, min. 99 %, p.a., 50 g, plastic
What is this article?
Thioacetamide, min. 99 %, p.a., 50 g, plastic is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Analytical grade solvents (p.a.), inside Solvents, in Lab chemicals.
An analytical-grade solvent, often marked p.a., has impurity limits tight enough for classical analysis and for preparing reagents. It is not automatically low enough in UV absorbance for HPLC, and it is not dry enough for a water-sensitive reaction. The grade is the purchase.
A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.
Which category should I open next?
The category is Solvents. The sub-category is Analytical grade solvents (p.a.). The catalogue is Lab chemicals.
Shelves beside this one are HPLC & LC-MS grade solvents, Dry & deuterated solvents (NMR, synthesis), Technical & synthesis grade solvents and Green & alternative solvents.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Delivery across Europe, two to five days when in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
