Isooctane, ROTISOLV® min. 99,7 %, Pestilyse® plus, 2,5 l, verre

Catalog nr. 7580.1
Carl Roth

Volume: 2,5 liter
Waardepakketten: 1 stuk
Prix:
Prix réduit€166,65
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

L'isooctane ROTISOLV® min. 99,7 % Pestilyse® plus est un solvant hydrocarboné de haute pureté de formule brute C₈H₁₈, numéro CAS 540-84-1 et numéro CE 208-759-1. Il présente une masse molaire de 114,23 g/mol, une densité de 0,69 g/cm³, un point d'ébullition de 99,2 °C et un point d'éclair de −12 °C. Cette qualité Pestilyse® plus est adaptée aux applications chromatographiques et à la chromatographie en phase gazeuse, où une teneur minimale définie garantit la performance analytique. Le produit est conditionné dans une bouteille en verre de 2,5 l pour l'utilisation de solvants en laboratoire et la manipulation d'échantillons. Les données de densité et d'ébullition facilitent la sélection du solvant et la configuration des méthodes dans les flux de travail GC. Disponible auprès du fabricant Carl ROTH dans la gamme ROTISOLV®, ce produit est destiné aux laboratoires nécessitant de l'isooctane pour des travaux chromatographiques sensibles aux résidus. La classification de transport fait référence au numéro ONU 1262 pour ce solvant inflammable. Les utilisateurs peuvent employer ce produit pour la préparation d'échantillons et les procédures chromatographiques spécifiant un minimum de 99,7 % d'isooctane. Une indication claire de la formule, de la masse molaire et des constantes physiques favorise une pratique de laboratoire reproductible pour les tâches analytiques courantes et spécialisées.

Cet article appartient aux catégories Solvants de qualité HPLC et LC-MS et Solvants. Voir aussi Solvants de qualité analytique (p.a.).

Caractéristiques principales

  • Teneur (GC) : ≥99,7 %
  • Couleur (APHA) : ≤5
  • Eau (KF) : ≤0,01 %
  • Acide libre (sous forme de CH3COOH) : ≤0,001 %
  • Résidu d'évaporation : ≤0,0001 %
  • Adaptabilité GC/FID (sous forme de 2-octanol) : ≤10 ng/ml
  • Adaptabilité GC/ECD (sous forme d'époxyde d'heptachlore) : ≤10 ng/l
  • GC/ECD dioxines, furanes et PCB (sous forme de lindane) : ≤5 ng/l
  • GC/ECD pesticides (sous forme de lindane) : ≤5 ng/l
  • GC/NPD pesticides (sous forme de parathion) : ≤5 ng/l
  • Numéro CAS : 540-84-1
  • Conditionnement : 2,5 l verre
  • Numéro CE : 208-759-1
  • Masse molaire : 114,23 g/mol
  • Densité : 0,69 g/cm³
  • Fiche technique : PDF
  • Fiche de données de sécurité : PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS02GHS07GHS08GHS09 Danger

Hazard Statements (H-Phrases)

H225 Highly flammable liquid and vapour
H304 May be fatal if swallowed and enters airways
H315 Causes skin irritation
H336 May cause drowsiness or dizziness
H410 Very toxic to aquatic life with long lasting effects

Precautionary Statements (P-Phrases)

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302+P352 IF ON SKIN: Wash with plenty of water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P312 P312 – No description available

Récemment consulté

Vous aimerez peut-être aussi

Questions about Isooctane, ROTISOLV® min. 99,7 %, Pestilyse® plus, 2,5 l, verre

What is this article?

Isooctane, ROTISOLV® min. 99,7 %, Pestilyse® plus, 2,5 l, verre is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in HPLC & LC-MS grade solvents, inside Solvents, in Produits chimiques.

HPLC grade limits the absorbance and the residue that would appear as peaks or baseline drift. LC-MS grade goes further on metal ions and on particles that would suppress a mass spectrum. A solvent that is only analytical grade is a false economy on an LC-MS system.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?