Trichlorométhane/Chloroforme, min. 99 %, DAB, BP, extra pur, 100 ml, verre

Catalog nr. 6340.4
Carl Roth

Volume: 100 ml
Quantité: 1 pièce
Prix:
Prix réduit€24,20
Demander un devis pour commande en gros

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Description

Le trichlorométhane (chloroforme) est un solvant de laboratoire extra pur titrant au minimum 99 %, conforme aux normes DAB et BP, et stabilisé à l'éthanol. Sa formule brute est CHCl₃, son numéro CAS est 67-66-3 et son numéro CE est 200-663-8 ; il présente une masse molaire de 119,38 g/mol, une densité de 1,48 g/cm³ et un point d'ébullition de 61 °C. Cette qualité est destinée à l'extraction, à la préparation d'échantillons et à l'usage courant en tant que solvant lorsqu'une pureté conforme à la pharmacopée est requise. En tant que solvant chloré classique, le trichlorométhane offre un fort pouvoir solvant et un point d'ébullition relativement bas sous des conditions de manipulation contrôlées. Le produit du fabricant Carl ROTH correspond au profil extra pur stabilisé à l'éthanol pour les laboratoires spécifiant du chloroforme DAB/BP. Consultez toujours les informations de sécurité applicables à cette substance avant toute utilisation dans des flux de travail de synthèse, d'analyse ou de procédé.

Cet article appartient aux catégories Analyseurs d'humidité, dans Balances.

Caractéristiques principales

  • Teneur (GC) : ≥99,0 %
  • Densité (d 20 °C/20 °C) : 1,479-1,481
  • Plage d'ébullition : 59-62 °C
  • Aspect de la substance : conforme
  • Acidité/alcalinité : conforme
  • Chlore libre (Cl) : conforme
  • Résidu de calcination : ≤0,002 %
  • Chlorure (Cl) : conforme
  • Eau : ≤0,05 %
  • Aldéhydes : conforme
  • Numéro CAS : 67-66-3
  • Conditionnements : 1 l, 2,5 l, 5 l, 100 ml, 25 l, 10 l
  • N° CE : 200-663-8
  • Pureté : min. 99 %, DAB, BP, extra pur
  • Formule brute : CHCl₃
  • Masse molaire : 119,38 g/mol
  • Fiche technique : PDF
  • Fiche de données de sécurité : PDF

Besoin d'une assistance technique ?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS06GHS08 Dangerosité

Hazard Statements (H-Phrases)

H302 Harmful if swallowed
H315 Causes skin irritation
H319 Causes serious eye irritation
H331 Toxic if inhaled
H351 Suspected of causing cancer
H361d H361d – No description available
H372 Causes damage to organs through prolonged or repeated exposure

Precautionary Statements (P-Phrases)

P202 P202 – No description available
P260 P260 – No description available
P302+P352 IF ON SKIN: Wash with plenty of water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313 IF exposed or concerned: Get medical advice/attention.

Récemment consulté

Vous aimerez peut-être aussi

Questions about Trichlorométhane/Chloroforme, min. 99 %, DAB, BP, extra pur, 100 ml, verre

What is this article?

Trichlorométhane/Chloroforme, min. 99 %, DAB, BP, extra pur, 100 ml, verre is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Moisture analysers, inside Balances & scales, in Instruments de laboratoire.

A moisture analyser is a balance with a halogen or infrared heater. It records the loss of mass as a sample dries and reports that loss as moisture. The temperature program and the sample mass decide whether the number is water or is decomposition.

A balance compares a mass with a standard. An analytical balance reads to 0.1 mg or finer and needs a draft shield and a stable bench. A precision balance is coarser and faster. A platform scale takes a heavier load. The reading is only as good as the calibration chain back to the kilogram, which is why test weights and a certificate exist. A moisture analyser is a balance with a heater: it records the loss of mass as water leaves. The unit of mass is kept by the BIPM, compared across Europe by EURAMET, and accredited by BELAC. NIST publishes the same measurement foundations.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?