Cationic polymer emulsion CL 645

Catalog nr. 3H92.1

Available

Carl Roth

Pack size: 1 l
Price:
Sale price€32,15
Ask quote for bulk order

Description

Cationic polymer emulsion CL 645 is a ROTI®Floc flocculation aid supplied as a ready-to-handle liquid emulsion for laboratory and process use in solid–liquid separation. With a density of 1 to 1,1 g/cm³ and a boiling point above 100 °C, the formulation is suited to aqueous systems where cationic charge supports aggregation of suspended particles and improves clarification performance. This 1 l plastic pack from manufacturer Carl ROTH is intended for controlled dosing in flocculation and precipitation workflows, including sample preparation, wastewater-related trials, and general chemical processing that relies on polymer-assisted settling. The emulsion format supports straightforward dilution and mixing before application, helping operators adjust working strength to the solids load and matrix under study. CL 645 belongs to the ROTI®Floc range of cationic polymer emulsions used where charge-driven floc formation is required. Physical data from the manufacturer description—density in the 1–1,1 g/cm³ range and boiling point greater than 100 °C—support routine handling under standard laboratory conditions. Use according to your process protocol and local laboratory practice for flocculant emulsions.

This article is part of ICP, AAS & ion standards, in Analytical standards & reference materials.

Key features

  • Appearance: milky viscous fluid
  • Solids content: 46.0-53.0 %
  • Relative density: 1.0-1.1 g/cm³
  • Residual monomer content: 0-999 ppm
  • Viscosity: 500-2000 cPs
  • Pack sizes: 1 l, 5 l, 10 l, 25 l
  • Density: 1 to 1,1 g/cm³
  • Boiling point: >100 °C
  • Product line: ROTI®Floc
  • Form: Cationic polymer emulsion
  • UNSPSC: 47101617
  • Technical Information Sheet: PDF
  • Safety Data Sheet: PDF

Recently viewed

You may also like

Questions about Cationic polymer emulsion CL 645

What is this article?

Cationic polymer emulsion CL 645 is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in ICP, AAS & ion standards, inside Analytical standards & reference materials, in Lab chemicals.

An ICP, AAS or ion standard is a solution of a stated element or ion at a stated concentration, with an uncertainty. It is the calibration point of a spectrometer or an electrode. The matrix, often dilute acid, has to match the method. A standard past its expiry is not that concentration.

A reference material is the article against which another result is compared. Its value is stated, and the uncertainty of that value is part of the product. An ICP or ion standard is a solution of known concentration. A volumetric standard is for titration. A chromatography standard is the peak you match. The grade names, including pharmacopoeia and ASTM, say which impurities were limited. Identity is checked on PubChem. Names follow IUPAC. Medicinal grades follow the European Pharmacopoeia and USP.

Which category should I open next?
What should I check before I order?

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?