Solvent waste caps, safety funnels & canisters

A safety cap lets tubing, for example from HPLC systems, connect tightly. It has an exhaust filter with activated carbon, so vapours do not escape into the lab, and a non-return valve. The container stays closed while it fills, which protects both staff and the lab air. Replace the filter at fixed intervals. See HPLC fittings, tubing and inline filters and waste containers and canisters. Unsure which one fits? Ask sales@luminixhealth.com.

Look for the thread marking on the container, or measure the outer diameter of the thread. The cap or funnel must have exactly the same thread, because a near match will leak vapour. Common thread families include GL and S threads; for other threads, adapters are available. Note the thread size for reorders. Adapters let one cap fit several containers. Compare threads in solvent waste caps, safety funnels and canisters. Need advice for your set-up? Mail sales@luminixhealth.com.

With flammable solvents, static charge built up while pouring can produce a spark. Conductive containers and funnels, together with an earthing cable, carry that charge away safely. Whether you need them follows from your own explosion risk assessment. Check the earthing connection regularly and after each move. Store full containers of flammable solvent waste correctly; see safety cabinets for flammables and chemicals. For a quote or a second opinion, write to sales@luminixhealth.com.

Options include a fill level indicator or float in the cap, a transparent window in the container, or an electronic level alarm. Never fill a container to the brim; leave room for expansion, especially in a warm lab. Swap containers in good time and label them clearly. A common guide is to stop filling at about 90 percent of the nominal volume. Place them in a tray to catch drips; see spill trays, sumps and drum storage. Questions about a specific product? Contact sales@luminixhealth.com.

A solvent waste cap and a safety funnel close a waste can so vapour does not fill the room, while still letting waste be poured in. The thread has to match the can. A filter and a level indicator are common features. An open beaker of waste solvent is not this article.

Laboratory waste is sorted before it is carried away. A solvent waste can has a cap and often a funnel that limits vapour. A sharps container is rigid and closable. An autoclave bag is for material that will be sterilised before it is ordinary waste. The container has to survive the chemical that goes into it. A bag that dissolves is not a container. Classification of the chemicals is on ECHA. Transport of dangerous goods is the UNECE framework. Workplace practice is EU-OSHA.

This shelf belongs to Waste disposal, inside Lab safety equipment. Luminix Health distributes this range for laboratory use.

The neighbouring shelves are Autoclave & disposal bags, Waste containers & canisters and Sharps containers, absorbents & spill kits. The category above this shelf is Waste disposal.

Luminix Health distributes this range from the heart of Europe. We deliver across the EU in two to five days if in stock. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. Send a quote request, contact the team, or read who we are. The full brand index is on shop by brand.

The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology. If the article is not on the shelf, request a quote.