Description
ICP-MS Multi-Element Standard Solution CR-37 ROTI®Star is a ready-to-use calibration standard containing 26 elements at 10 mg/l for inductively coupled plasma mass spectrometry. The solution comprises Al, As, B, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Ni, Pb, V, Zn, Mo, P, S, Sn, Ti, W and Zr in 5% HNO3, supporting multi-element quantification in analytical chemistry laboratories. Density is approximately 1 g/cm³ and the boiling point is above 83 °C; the preparation is assigned UN number 2031. Supplied in a 100 ml pack from manufacturer Carl ROTH, this ROTI®Star standard is intended for ICP-MS methods that require a defined multi-element mix in nitric acid matrix. It suits routine calibration, instrument set-up and method verification where simultaneous monitoring of the listed analytes is needed. The formulation provides a practical working standard for environmental, materials and quality-control laboratories performing trace multi-element analysis by ICP-MS.
This article is part of ICP, AAS & ion standards, in Analytical standards & reference materials.
Key features
- UNSPSC: 41116107
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information
DangerHazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Browse related categories
Category
Analytical standards & reference materials
Sub-category
Catalogue
Brand
Questions about ICP-MS Multi-Element Standard Solution
What is this article?
ICP-MS Multi-Element Standard Solution is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in ICP, AAS & ion standards, inside Analytical standards & reference materials, in Lab chemicals.
An ICP, AAS or ion standard is a solution of a stated element or ion at a stated concentration, with an uncertainty. It is the calibration point of a spectrometer or an electrode. The matrix, often dilute acid, has to match the method. A standard past its expiry is not that concentration.
A reference material is the article against which another result is compared. Its value is stated, and the uncertainty of that value is part of the product. An ICP or ion standard is a solution of known concentration. A volumetric standard is for titration. A chromatography standard is the peak you match. The grade names, including pharmacopoeia and ASTM, say which impurities were limited. Identity is checked on PubChem. Names follow IUPAC. Medicinal grades follow the European Pharmacopoeia and USP.
Which category should I open next?
The category is Analytical standards & reference materials. The sub-category is ICP, AAS & ion standards. The catalogue is Lab chemicals.
Shelves beside this one are Chromatography standards (GC, HPLC, pesticides), Reference substances & reagents (other), Volumetric standard solutions (titration), Reagents for analysis (Ph. Eur., ASTM, DIN), Spectroscopy & physical property standards and Indicators & indicator solutions.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within two to five working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
