Description
TOC Standard ROTI®Calipure 100 mg/l is a ready-to-use calibration solution for total organic carbon determination, prepared as potassium hydrogen phthalate. Density is approximately 1 g/cm³ and the boiling point is 100 °C, consistent with an aqueous calibration matrix. This standard from manufacturer Carl ROTH supports accurate response checks in environmental, pharmaceutical and industrial water laboratories that monitor organic carbon. The ROTI®Calipure grade is intended for analytical workflows where traceable concentration values and straightforward handling matter. Use the solution according to your analyser method and laboratory quality system to establish or verify the calibration curve at the 100 mg/l level and maintain consistent TOC measurement performance over time.
This article is part of Reagents for analysis (Ph. Eur., ASTM, DIN), in Analytical standards & reference materials.
Key features
- c (C) as KC8H5O4: 100 mg/l
- Pack sizes: 100 ml, 500 ml
- Density: ~1 g/cm³
- Boiling point: 100 °C
- Product: TOC Standard ROTI®Calipure
- Concentration: 100 mg/l
- Technical Information Sheet:
- Safety Data Sheet:
Recently viewed
You may also like
Browse related categories
Category
Analytical standards & reference materials
Sub-category
Reagents for analysis (Ph. Eur., ASTM, DIN)
Catalogue
Brand
Questions about TOC Standard, ROTI®Calipure 100 mg/l , 100 ml, glass
What is this article?
TOC Standard, ROTI®Calipure 100 mg/l , 100 ml, glass is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Reagents for analysis (Ph. Eur., ASTM, DIN), inside Analytical standards & reference materials, in Lab chemicals.
A reagent for analysis is a chemical whose impurities are limited so they do not become a signal in a titration, a digestion or a photometric method. Pharmacopoeia, ASTM and DIN names point at different limit lists. The grade, not only the identity, is the purchase.
A reference material is the article against which another result is compared. Its value is stated, and the uncertainty of that value is part of the product. An ICP or ion standard is a solution of known concentration. A volumetric standard is for titration. A chromatography standard is the peak you match. The grade names, including pharmacopoeia and ASTM, say which impurities were limited. Identity is checked on PubChem. Names follow IUPAC. Medicinal grades follow the European Pharmacopoeia and USP.
Which category should I open next?
The category is Analytical standards & reference materials. The sub-category is Reagents for analysis (Ph. Eur., ASTM, DIN). The catalogue is Lab chemicals.
Shelves beside this one are ICP, AAS & ion standards, Chromatography standards (GC, HPLC, pesticides), Reference substances & reagents (other), Volumetric standard solutions (titration), Spectroscopy & physical property standards and Indicators & indicator solutions.
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within two to five working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
