Description
Microwave oven MW6000 is a laboratory microwave with a 25 l stainless-steel chamber designed for controlled sample irradiation. High-frequency power reaches 1000 W across five selectable levels (0, 20, 50, 70 and 100 %), with a maximum irradiation time of 60 minutes and the option to run up to three sequential steps at different power settings. Guided exhaust exits via a lateral DN 50 nozzle that can be linked to a fume hood; a condensation cooler may be fitted in the exhaust path. Three 13 mm media ports allow introduction of media, extraction or cooling lines. A flow-through cooler can be installed to absorb surplus energy when loads are small. The interior floor is a ceramic plate; radiation is distributed by a rotating wobbler beneath the base. Optional temperature control can hold a liquid at a set point, ideally with a magnetic stirrer. External dimensions are 511 × 432 × 311 mm; internal working space is 327 × 346 × 200 mm. Connection is 220–240 V, 50 Hz, 1550 W. Net weight is 22,5 kg. The unit is offered by manufacturer Landgraf HLL for routine laboratory microwave work.
This article is part of Drying ovens & climate chambers, in Heating, drying & cooling.
Key features
- Pack size: 1 pkg
- Chamber volume: 25 l
- HF power: 1000 W
- Power levels: 0, 20, 50, 70, 100 %
- Internal dimensions (W × D × H): 327 × 346 × 200 mm
- External dimensions (W × D × H): 511 × 432 × 311 mm
- Technical Information Sheet:
Recently viewed
You may also like
Questions about Microwave MW6000
What is this article?
Microwave MW6000 is the article on this page. Luminix Health distributes Landgraf HLL for laboratory use. It sits in Drying ovens & climate chambers, inside Heating, drying & cooling, in Lab instruments.
A drying oven holds a temperature above ambient to drive off water or to condition a sample. A climate chamber also holds humidity. Uniformity across the chamber, not only the set point, decides whether two samples on different shelves saw the same conditions.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Drying ovens & climate chambers. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
