Description
A 10.4 grinding chamber reducer is a specialised laboratory accessory that reduces the effective volume of the grinding chamber when only small quantities of sample material are available. By adapting the chamber geometry to limited sample masses, it keeps the material properly engaged with the grinding elements, improving milling efficiency and recovery of precious or scarce specimens. This accessory is intended for use with compatible laboratory mills and supports reproducible sample preparation in analytical, research and quality-control workflows. Supplied as a single piece with a net weight of 0,044 kg and a gross weight of 0,044 kg, the A 10.4 integrates straightforwardly into existing milling setups. Laboratories working with low sample volumes benefit from reduced dead space and lower risk of material loss compared with a full-size chamber. The reducer is offered by manufacturer IKA within the accessory range for grinding equipment and is designed for quick installation and removal as experimental needs change. Its compact construction suits routine use while maintaining process consistency across successive small-batch preparations.
This article is part of Mills, grinders & homogenisers, in Test sieves & mills.
Key features
- Pack size: 1 pc
- Storage temperature: 5–40 °C
- Product type: Grinding chamber reducer
- EAN: 4053411039455
Recently viewed
You may also like
Questions about A 10.4, Grinding chamber reduction
What is this article?
A 10.4, Grinding chamber reduction is the article on this page. Luminix Health distributes IKA for laboratory use. It sits in Mills, grinders & homogenisers, inside Test sieves & mills, in Lab instruments.
A mill, grinder or homogeniser reduces particle size or breaks a tissue before an extraction. The rotor and the sieve insert decide the result. A knife mill and a bead mill are different machines. The sample has to tolerate the heat the motor puts into it.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Mills, grinders & homogenisers. The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Sieve shakers and Sieve accessories (lids, pans, rings).
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
Luminix Health distributes this article from the heart of Europe. Articles in stock ship within 2–5 business days. Standard delivery is free from €250 excl. VAT. Cold-chain goods and dangerous goods under ADR are never included in that free delivery. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.