Description
Acetate buffer solution pH 5.0 is a ready-to-use laboratory reagent manufactured to Reag. Ph. Eur. 4.1.3 for analytical and pharmaceutical applications that require buffering at pH 5,0. With a density near 1 g/cm³ and a boiling point of 100 °C, the acetate system provides a reliable aqueous medium for pH control in titrations, sample preparation, and pharmacopoeial procedures. The product is supplied in a 1 l plastic container for convenient handling on the analytical bench. This buffer from manufacturer Carl ROTH forms part of the dedicated Ph. Eur. 4.1.3 special buffer range used in quality-control and research laboratories. Using a pre-prepared acetate buffer reduces preparation time and supports method consistency where monographs or internal SOPs specify acetate buffer solution pH 5.0. Typical uses include pH adjustment, reference buffering, and supporting assays that depend on a defined acetate environment under European Pharmacopoeia reagent conditions.
This article is part of pH buffers & conductivity standards, in Buffers & pH solutions.
Key features
- Pack size: 1 l plastic
- Density: ~1 g/cm³
- Boiling point: 100 °C
- Specification: Reag. Ph. Eur. 4.1.3
- Buffer type: Acetate buffer solution
- Technical Information Sheet:
- Safety Data Sheet:
Recently viewed
You may also like
Questions about Acetate buffer solution pH 5.0, Reag. Ph. Eur. 4.1.3, 4009100, 1 l, plastic
What is this article?
Acetate buffer solution pH 5.0, Reag. Ph. Eur. 4.1.3, 4009100, 1 l, plastic is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in pH buffers & conductivity standards, inside Buffers & pH solutions, in Lab chemicals.
A pH buffer for calibration has a stated pH at a stated temperature, often traceable. A conductivity standard has a stated conductivity. They are not general reagents and they should not be poured back into the bottle. The temperature of the measurement has to be the temperature on the label, or the meter has to compensate.
A buffer resists a change in pH when a little acid or base is added. It does that because a weak acid and its conjugate base are both present. A pH buffer used to calibrate a meter has a stated value at a stated temperature. A biological buffer such as Tris or HEPES is chosen because it holds the pH of a living system and does not poison it. Conductivity standards are the sister articles for a conductivity meter. The ions are on PubChem. Electrode calibration practice sits with EURAMET and BELAC.
Which category should I open next?
The category is Buffers & pH solutions. The sub-category is pH buffers & conductivity standards. The catalogue is Lab chemicals.
Shelves beside this one are Biological buffers (Tris, HEPES, MOPS) and Buffers (other).
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
