Description
Acetone ROTIPURAN® min. 99,7 %, p.a. is a high-purity analytical solvent supplied for laboratory use where consistent quality is required. The product has the empirical formula C₃H₆O, CAS number 67-64-1 and EG nr. 200-662-2, with a molar mass of 58,08 g/mol. Physical data include a density of 0,79 g/cm³, a flash point of −17 °C and a boiling point of 56,05 °C, supporting correct handling and process planning in analytical and preparative work. Acetone of this purity is commonly selected for cleaning, sample preparation and general solvent duties where a defined minimum assay of 99,7 % is specified. Available from manufacturer Carl ROTH under the ROTIPURAN® p.a. line, suits routine bench supply and controlled dispensing. Laboratories can rely on the stated identity, assay and physicochemical parameters when documenting methods, preparing reagents or specifying solvents for analytical workflows that call for acetone of defined purity.
This article is part of Analytical grade solvents (p.a.), in Solvents.
Key features
- Assay: ≥99.7 %
- Refractive index (20 °C): 1.358-1.360
- Density (20 °C): 0.790-0.794
- Evaporation residue: ≤0.001 %
- Water: ≤0.5 %
- Al (Aluminium): ≤0.00005 %
- B (Boron): ≤0.00005 %
- Ba (Barium): ≤0.00005 %
- Ca (Calcium): ≤0.00005 %
- Cd (Cadmium): ≤0.000005 %
- CAS number: 67-64-1
- Pack sizes: 1 l, 2.5 l, 5 l, 10 l, 25 l
- EG nr.: 200-662-2
- Purity: min. 99,7 %, p.a.
- Molar mass: 58,08 g/mol
- Density: 0,79 g/cm³
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information
DangerHazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Questions about Acetone, ROTIPURAN® min. 99,7 %, p.a., 1 l, glass
What is this article?
Acetone, ROTIPURAN® min. 99,7 %, p.a., 1 l, glass is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Analytical grade solvents (p.a.), inside Solvents, in Lab chemicals.
An analytical-grade solvent, often marked p.a., has impurity limits tight enough for classical analysis and for preparing reagents. It is not automatically low enough in UV absorbance for HPLC, and it is not dry enough for a water-sensitive reaction. The grade is the purchase.
A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.
Which category should I open next?
The category is Solvents. The sub-category is Analytical grade solvents (p.a.). The catalogue is Lab chemicals.
Shelves beside this one are HPLC & LC-MS grade solvents, Dry & deuterated solvents (NMR, synthesis), Technical & synthesis grade solvents and Green & alternative solvents.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within two to five working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
