Description
Bioethanol SOLVAGREEN® is a 96 % ethanol grade conforming to Ph. Eur., with CAS number 64-17-5 and empirical formula C₂H₆O. It has a molar mass of 46,07 g/mol, a density of 0,81 g/cm³, a flash point of 12 °C and a boiling point of 78 °C, and is identified under EG nr. 200-578-6 (UN 1170). This variant is Categories such as raw materials for disinfectants, disinfection and decontamination work, and related research settings benefit from a clear specification profile and convenient glass packaging for handling and storage on the bench. The product is available from manufacturer Carl ROTH as part of the SOLVAGREEN® range, offering a practical pack size for routine use without excess bulk. Physical data including density, boiling point and flash point support safe process planning, solvent selection and documentation in regulated or quality-controlled environments where Ph. Eur. alignment and traceable identity matter.
This article is part of Green & alternative solvents, in Solvents.
Key features
- Assay (V/V): 95.1-96.9 %
- Properties: complies
- Appearance: complies
- Acid or alkaline react. substances: ≤0.003 %
- Density (d 20 °C/20 °C): 0.805-0.812
- Evaporation residue: ≤0.0025 %
- Permanganate test: complies
- 240 nm: ≤0.40
- 250-260 nm: ≤0.30
- 270-340 nm: ≤0.10
- CAS number: 64-17-5
- Pack sizes: 1 l, 2.5 l, 5 l, 10 l, 25 l
- EG nr.: 200-578-6
- Purity: 96 %, Ph. Eur.
- Molar mass: 46,07 g/mol
- Density: 0,81 g/cm³
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information
DangerHazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Bioethanol SOLVAGREEN®, 96 %, Ph. Eur., 1 l, glass
What is this article?
Bioethanol SOLVAGREEN®, 96 %, Ph. Eur., 1 l, glass is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Green & alternative solvents, inside Solvents, in Lab chemicals.
A green or alternative solvent is chosen to replace a more hazardous one, often with a higher boiling point or a different polarity. It is not automatically equivalent in a method. The replacement has to dissolve the same compounds and leave the same impurities behind, which is a test, not a label.
A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.
Which category should I open next?
The category is Solvents. The sub-category is Green & alternative solvents. The catalogue is Lab chemicals.
Shelves beside this one are Analytical grade solvents (p.a.), HPLC & LC-MS grade solvents, Dry & deuterated solvents (NMR, synthesis) and Technical & synthesis grade solvents.
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within two to five working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
