Description
The constant climate chamber KBF 1060 with wide temperature and humidity range provides reliable environmental control for demanding laboratory applications. Designed for a temperature working range from 0 °C to 70 °C and featuring relative humidity as a controllable parameter, the chamber handles long-term tests, accelerated tests and stress tests with the precision required in regulated environments. It fulfils important ICH requirements relating to precision, programming and documentation, supporting pharmaceutical stability work and comparable materials studies. With optional light modules the KBF series can be configured as an ICH photostability test chamber or as a plant growth cabinet, extending its utility beyond standard climate simulation. This single-piece unit from manufacturer Binder has a net weight of 389 kg and a gross weight of 391 kg, reflecting a robust construction suited to continuous laboratory use. Laboratories performing ICH-compliant stability programmes, accelerated ageing or controlled humidity experiments will find the KBF 1060 a capable platform for reproducible climatic conditions over extended test durations.
This article is part of Drying ovens & climate chambers, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Min. operating temperature: 0 °C
- Max. operating temperature: 70 °C
- Controllable parameters: Relative humidity
- Manufacturer: Binder
- Net weight: 389 kg
- Gross weight: 391 kg
- UNSPSC: 41104900
- Interior dimensions: 1011 × 847 × 1250 mm (W × D × H)
- Exterior dimensions: 1285 × 1175 × 1951 mm (W × D × H)
- Weight, empty: 340 kg
- Voltage: 220...240 V, 50/60 Hz
- Nominal power: 1.6 kW
- Temperature range: 0...70 °C
- Temperature range with humidity: 10...70 °C
- Temperature uniformity at 25 °C and 60% RH: ±0.3 K
- Temperature uniformity at 40 °C and 75% RH: ±0.2 K
- Temperature fluctuation at 25 °C and 60% RH: ±0.1 K
- Temperature fluctuation at 40 °C and 75% RH: ±0.1 K
- Recovery time after a 30 s door opening at 25 °C and 60% RH: 2 min
- Recovery time after a 30 s door opening at 40 °C and 75% RH: 6 min
- Humidity range: 10...80 % RH
- Humidity fluctuation at 25 °C and 60% RH: ±1.5 % RH
- Humidity fluctuation at 40 °C and 75% RH: ±1.5 % RH
- Max. heat compensation at 40 °C: 640 W
- Inner doors: 2
- Shelves, standard / maximum: 2/16
- Load per rack: 40 kg
- Permitted load: 200 kg
- Energy consumption at 25 °C and 60% RH: 365 Wh/h
- Energy consumption at 40 °C and 75% RH: 370 Wh/h
- Wall clearance, side: 180 mm
- Wall clearance, back: 100 mm
- Sound pressure level at 25 °C and 60% RH: 52 dB(A)
- Data Sheet:
Recently viewed
You may also like
Questions about Constant climate chamber KBF 1060 with a large temperature and humidity range
What is this article?
Constant climate chamber KBF 1060 with a large temperature and humidity range is the article on this page. Luminix Health distributes Binder for laboratory use. It sits in Drying ovens & climate chambers, inside Heating, drying & cooling, in Lab instruments.
A drying oven holds a temperature above ambient to drive off water or to condition a sample. A climate chamber also holds humidity. Uniformity across the chamber, not only the set point, decides whether two samples on different shelves saw the same conditions.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Drying ovens & climate chambers. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.































