Description
Constant climate chamber KBF 130 with wide temperature and humidity range masters all long-term tests, accelerated tests and stress tests. It meets all important ICH requirements covering precision, programming and documentation. With optional light modules the KBF becomes an ICH photostability test chamber or a plant growth chamber. Operating temperatures range from 0 °C to +70 °C, and relative humidity is a controllable parameter in the series or as an option. The unit is supplied as 1 pc with a net weight of 143 kg and a gross weight of 145 kg. This constant climate chamber from manufacturer Binder is designed for demanding stability and climate testing workflows. Manufactured in Germany in the Baden-Württemberg region, the KBF 130 supports climate-chamber applications that need reliable temperature and humidity control across a broad working range. Laboratories can rely on its ICH-oriented precision, programming and documentation capabilities, while optional light modules extend use to photostability testing or plant growth studies on the same chamber platform.
This article is part of Drying ovens & climate chambers, in Heating, drying & cooling.
Key features
- Pack size: 1 pc
- Temperature range: 0 °C to +70 °C
- Controllable parameters: Relative humidity
- Country of origin: Germany
- Manufacturer: Binder
- Net weight: 143 kg
- Gross weight: 145 kg
- UNSPSC: 41104900
- Interior dimensions: 656 × 386 × 500 mm (W × D × H)
- Exterior dimensions: 900 × 710 × 1005 mm (W × D × H)
- Weight, empty: 126 kg
- Voltage: 220...240 V, 50/60 Hz
- Nominal power: 1.6 kW
- Temperature range with humidity: 10...70 °C
- Temperature uniformity at 25 °C and 60% RH: ±0.2 K
- Temperature uniformity at 40 °C and 75% RH: ±0.2 K
- Temperature fluctuation at 25 °C and 60% RH: ±0.1 K
- Temperature fluctuation at 40 °C and 75% RH: ±0.1 K
- Recovery time after a 30 s door opening at 25 °C and 60% RH: 2 min
- Recovery time after a 30 s door opening at 40 °C and 75% RH: 3 min
- Humidity range: 10...80 % RH
- Humidity fluctuation at 25 °C and 60% RH: ±1.5 % RH
- Humidity fluctuation at 40 °C and 75% RH: ±1.5 % RH
- Max. heat compensation at 40 °C: 270 W
- Inner doors: 1
- Shelves, standard / maximum: 2/6
- Load per rack: 30 kg
- Permitted load: 150 kg
- Energy consumption at 25 °C and 60% RH: 215 Wh/h
- Energy consumption at 40 °C and 75% RH: 230 Wh/h
- Wall clearance, side: 100 mm
- Wall clearance, back: 100 mm
- Sound pressure level at 25 °C and 60% RH: 47 dB(A)
- Data Sheet:
Recently viewed
You may also like
Questions about Constant climate chamber KBF 130
What is this article?
Constant climate chamber KBF 130 is the article on this page. Luminix Health distributes Binder for laboratory use. It sits in Drying ovens & climate chambers, inside Heating, drying & cooling, in Lab instruments.
A drying oven holds a temperature above ambient to drive off water or to condition a sample. A climate chamber also holds humidity. Uniformity across the chamber, not only the set point, decides whether two samples on different shelves saw the same conditions.
Temperature equipment either holds a set point or drives a sample toward one. An oven dries. A furnace reaches the temperatures of ashing and melting. A bath surrounds a vessel with water or oil. A circulator moves that fluid. An incubator holds the mild warmth of a culture. An autoclave uses steam under pressure to sterilise. The number that matters is the temperature the article actually reaches, not the number painted on the dial. Temperature is part of the international system kept by the BIPM and compared by EURAMET.
Which category should I open next?
The category is Heating, drying & cooling. The sub-category is Drying ovens & climate chambers. The catalogue is Lab instruments.
Shelves beside this one are Muffle & tube furnaces, Heating mantles, Circulators, chillers & thermostats, Water & oil baths, Hot plates & heating blocks, Incubators, Heating & cooling (other), Temperature control accessories, Laboratory refrigerators & freezers, Autoclaves & sterilisers, Bunsen & gas burners and Heating tapes, cables & plates.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within two to five working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
