Diethyl ether ROTIDRY®, min. 99,5 % (max. 60 ppm H2O),, 1 l, glass

Catalog nr. AE04.1

Available

Carl Roth

Volume: 1 liter
Value Packs: 1 piece
Price:
Sale price€66,55
Ask quote for bulk order

Description

Diethyl ether ROTIDRY® is a high-purity laboratory ether with a minimum assay of 99,5 % and a maximum water content of 60 ppm. It carries CAS number 60-29-7 and empirical formula C₄H₁₀O, together with a molar mass of 74,12 g/mol, a density of 0,71 g/cm³, a flash point of −40 °C and a boiling range of 34,58 to 34,59 °C. The product is stabilised with BHT. Packaged in a 1 l glass bottle from manufacturer Carl ROTH, this dry grade suits moisture-sensitive extractions, Grignard-type chemistry and other organic procedures that demand low residual water. The ROTIDRY® specification helps maintain solvent dryness during synthesis and work-up. Low boiling point and density support rapid concentration and phase separation steps common in preparative workflows. Analytical and research laboratories use diethyl ether of this quality when batch-to-batch water control is important for reproducible results. Handle only with appropriate precautions for highly flammable, low-boiling ethers in well-ventilated laboratory environments and follow established safety practice.

This article is part of Dry & deuterated solvents (NMR, synthesis), in Solvents.

Key features

  • Assay (GC): ≥99,5 %
  • Colour (Hazen): ≤10
  • Water (KF): ≤0.006 %
  • Acidity: ≤0,0005 meq/g
  • Evaporation residue: ≤0,001 %
  • CAS number: 60-29-7
  • Pack size: 1 l glass
  • EG nr.: 200-467-2
  • Purity: min. 99,5 % (max. 60 ppm H₂O)
  • Empirical formula: C₄H₁₀O
  • Molar mass: 74,12 g/mol
  • Technical Information Sheet: PDF
  • Safety Data Sheet: PDF

Compliance & Safety Information

GHS02, flammableGHS07, harmfulDanger

Hazard Statements (H-Phrases)

H224Extremely flammable liquid and vapour. H302Harmful if swallowed. H336May cause drowsiness or dizziness. EUH019May form explosive peroxides. EUH066Repeated exposure may cause skin dryness or cracking.

Precautionary Statements (P-Phrases)

P210Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P243Take action to prevent static discharges. P261Avoid breathing dust/fume/gas/mist/vapours/spray. P303+P361+P353IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340IF INHALED: Remove person to fresh air and keep comfortable for breathing. P312Call a POISON CENTRE/doctor if you feel unwell.

Recently viewed

You may also like

Questions about Diethyl ether ROTIDRY®, min. 99,5 % (max. 60 ppm H2O),, 1 l, glass

What is this article?

Diethyl ether ROTIDRY®, min. 99,5 % (max. 60 ppm H2O),, 1 l, glass is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Dry & deuterated solvents (NMR, synthesis), inside Solvents, in Lab chemicals.

A dry solvent has had water removed to a stated level, for a reaction that water would stop. A deuterated solvent replaces hydrogen with deuterium so an NMR spectrum is not drowned by the solvent signal. The isotopic enrichment and the water content are the two specifications. Caps and septa matter, because either product picks up moisture from the air.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?