Ethylene glycol, SOLVAGREEN® min. 99,9 %, for synthesis, 500 ml, plastic

Catalog nr. 3AXN.1

Available

Carl Roth

Volume: 500 ml
Value Packs: 1 piece
Price:
Sale price€21,40
Ask quote for bulk order

Description

Ethylene glycol SOLVAGREEN® min. 99,9 % is a high-purity solvent intended for synthesis, offered here Identified by CAS number 107-21-1 and empirical formula C₂H₆O₂, it has a molar mass of 62,07 g/mol and a density of 1,11 g/cm³. The boiling point lies between 197 and 198 °C, with a flash point of 111 °C. Made from renewable raw material under the SOLVAGREEN® concept from manufacturer Carl ROTH, this grade supports greener laboratory practice while remaining suitable for synthetic work. EG number 203-473-3 completes the chemical identity. Typical uses include organic synthesis, reaction media, and process chemistry where a reliable diol solvent is required.

This article is part of Green & alternative solvents, in Solvents.

Key features

  • CAS number: 107-21-1
  • Pack sizes: 500 ml, 1 l, 200 l, 2.5 l, 5 l, 10 l, 25 l
  • EG nr.: 203-473-3
  • Purity: min. 99,9 %
  • Molar mass: 62,07 g/mol
  • Technical Information Sheet: PDF

Compliance & Safety Information

GHS07, harmfulGHS08, health hazardWarning

Hazard Statements (H-Phrases)

H302Harmful if swallowed. H373May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements (P-Phrases)

P260Do not breathe dust/fume/gas/mist/vapours/spray. P270Do not eat, drink or smoke when using this product. P301+P312IF SWALLOWED: Call a POISON CENTRE/doctor if you feel unwell.

Recently viewed

You may also like

Questions about Ethylene glycol, SOLVAGREEN® min. 99,9 %, for synthesis, 500 ml, plastic

What is this article?

Ethylene glycol, SOLVAGREEN® min. 99,9 %, for synthesis, 500 ml, plastic is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Green & alternative solvents, inside Solvents, in Lab chemicals.

A green or alternative solvent is chosen to replace a more hazardous one, often with a higher boiling point or a different polarity. It is not automatically equivalent in a method. The replacement has to dissolve the same compounds and leave the same impurities behind, which is a test, not a label.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?
What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?