Description
ICP-MS Multi-Element Standard Solution ROTI®Star is a ready-to-use multi-element calibration standard containing 3 elements in 2 %. HNO3 for inductively coupled plasma mass spectrometry. Density is 1,009 g/cm³ and the boiling point is approximately 100 °C, supporting stable handling under typical laboratory conditions. is intended for instrument calibration, method development and routine quality control where traceable multi-element reference material is required. The dilute nitric acid matrix is compatible with common ICP-MS sample introduction systems and helps maintain elemental stability during analytical sequences. This ROTI®Star preparation from manufacturer Carl ROTH suits environmental monitoring, industrial quality control and research laboratories performing multi-element determinations at trace levels. Transport classification is UN 3264. Integrating the standard into daily ICP-MS workflows supports consistent quantification across batches and helps laboratories maintain reliable calibration curves for the three target elements throughout analytical runs.
This article is part of ICP, AAS & ion standards, in Analytical standards & reference materials.
Key features
- Chromium (Cr): 4 mg/l
- Iron (Fe): 20 mg/l
- Strontium (Sr): 4 mg/l
- Pack sizes: 100 ml, 500 ml
- Density: 1,009 g/cm³
- Boiling point: ~100 °C
- Product type: ICP-MS multi-element standard solution
- Brand line: ROTI®Star
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information
WarningHazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Browse related categories
Category
Analytical standards & reference materials
Sub-category
Catalogue
Brand
Questions about Multi-Element ICP-MS Standard Solution, 100 ml, 3 elements in 2 % HNO3
What is this article?
Multi-Element ICP-MS Standard Solution, 100 ml, 3 elements in 2 % HNO3 is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in ICP, AAS & ion standards, inside Analytical standards & reference materials, in Lab chemicals.
An ICP, AAS or ion standard is a solution of a stated element or ion at a stated concentration, with an uncertainty. It is the calibration point of a spectrometer or an electrode. The matrix, often dilute acid, has to match the method. A standard past its expiry is not that concentration.
A reference material is the article against which another result is compared. Its value is stated, and the uncertainty of that value is part of the product. An ICP or ion standard is a solution of known concentration. A volumetric standard is for titration. A chromatography standard is the peak you match. The grade names, including pharmacopoeia and ASTM, say which impurities were limited. Identity is checked on PubChem. Names follow IUPAC. Medicinal grades follow the European Pharmacopoeia and USP.
Which category should I open next?
The category is Analytical standards & reference materials. The sub-category is ICP, AAS & ion standards. The catalogue is Lab chemicals.
Shelves beside this one are Chromatography standards (GC, HPLC, pesticides), Reference substances & reagents (other), Volumetric standard solutions (titration), Reagents for analysis (Ph. Eur., ASTM, DIN), Spectroscopy & physical property standards and Indicators & indicator solutions.
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within two to five working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
