Description
Intermediate ring, 250x55 mm is a stainless steel accessory designed for analytical sieve stacks in particle size distribution work. It offers a diameter of 250 mm and a height of 55 mm, permitting controlled extension of the sieve column during laboratory fractionation. The part carries a net weight of 0,59 kg and is delivered as a single piece. Constructed from robust stainless steel, the ring forms a reliable intermediate element compatible with standard 250 mm test sieve frames. This intermediate ring from manufacturer NEXOPART enables modular build-up of sieve towers for both dry and wet sieving protocols in industrial, pharmaceutical and research laboratories. Accurate dimensional tolerances support secure stacking and alignment, helping preserve the integrity of multi-level assemblies throughout the analysis. Laboratories that require additional working height between successive sieves can incorporate the ring to adapt existing sets without compromising geometric consistency. The one-piece packaging simplifies inventory and immediate integration into current analytical sieve configurations.
This article is part of Sieve accessories (lids, pans, rings), in Test sieves & mills.
Key features
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Sieve accessories (lids, pans, rings)
Catalogue
Brand
Questions about Intermediate ring, 250x55 mm
What is this article?
Intermediate ring, 250x55 mm is the article on this page. Luminix Health distributes NEXOPART for laboratory use. It sits in Sieve accessories (lids, pans, rings), inside Test sieves & mills, in Lab instruments.
Sieve accessories are the lid, the pan and the intermediate rings that close a stack. The receiver pan is where the fines end. A lid from a different frame diameter does not seal the stack.
A test sieve sorts particles by whether they pass an opening. Wire mesh and perforated plate are two ways of making that opening, and the nominal size is not a suggestion. A sieve shaker repeats the motion so the result does not depend on how hard someone shook by hand. A mill or grinder makes the particles smaller before they are sieved. The certificate of the sieve, and the opening size, are what an audit asks for. Measurement practice around mass and dimension sits with the BIPM, EURAMET and BELAC.
Which category should I open next?
The category is Test sieves & mills. The sub-category is Sieve accessories (lids, pans, rings). The catalogue is Lab instruments.
Shelves beside this one are Test sieves (wire mesh), Test sieves (perforated plate), Mills, grinders & homogenisers and Sieve shakers.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.


















