Description
Methanol 60 % is a synthesis-grade solvent mixture supplied for laboratory chemical work where a defined aqueous methanol content is specified. The article corresponds to CAS number 67-56-1 and EG number 200-659-6, with empirical formula CH₃OH for the methanol component, molar mass 32,04 g/mol, density 0,895 g/cm³, flash point 10 °C and boiling point 65 °C. These values support solvent selection, equipment rating and routine safety assessment in synthesis and general chemistry settings. Offered from manufacturer Carl ROTH, this 60 % grade gives a ready concentration option when full anhydrous methanol is not required. UN number 1230 is associated with the methanol identity and should be observed in transport and storage planning according to site rules. Clear physical constants and regulatory identifiers help laboratories document reagents in SOPs, purchasing files and risk assessments.
This article is part of Analytical grade solvents (p.a.), in Solvents.
Key features
- Assay (MeOH, v/v): 59-61 %
- Density (d 20 °C/20 °C): 0,9060-0,9104
- CAS number: 67-56-1
- Pack sizes: 1 l, 2.5 l, 5 l, 10 l, 25 l
- EG nr.: 200-659-6
- Empirical formula: CH₃OH
- Concentration: 60 %
- Molar mass: 32,04 g/mol
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information
DangerHazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Questions about Methanol 60 %, 60 %, for synthesis, 1 l, plastic
What is this article?
Methanol 60 %, 60 %, for synthesis, 1 l, plastic is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Analytical grade solvents (p.a.), inside Solvents, in Lab chemicals.
An analytical-grade solvent, often marked p.a., has impurity limits tight enough for classical analysis and for preparing reagents. It is not automatically low enough in UV absorbance for HPLC, and it is not dry enough for a water-sensitive reaction. The grade is the purchase.
A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.
Which category should I open next?
The category is Solvents. The sub-category is Analytical grade solvents (p.a.). The catalogue is Lab chemicals.
Shelves beside this one are HPLC & LC-MS grade solvents, Dry & deuterated solvents (NMR, synthesis), Technical & synthesis grade solvents and Green & alternative solvents.
What should I check before I order?
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
