Description
Micro-inserts in borosilicate clear glass with a conical 15 mm tip provide a working volume of 0,1 ml for small-aliquot sample handling in autosampler vials. They are used in laboratory glassware setups for chromatography and general analytical work where limited sample must be concentrated into a narrow geometry for reliable needle access. The conical tip helps gather residual liquid at the base, supporting efficient uptake from low fill levels during injection or transfer steps. Clear borosilicate glass permits visual control of sample presence and meniscus position when the insert is seated in a compatible outer vial. These micro-inserts belong to the laboratory consumables range from manufacturer ROTH SELECTION and complement autosampler vials and sample bottles used in routine analytical sequences. Each unit pack comprises 100 pc(s), suitable for method development batches and ongoing instrument operation. With a pack weight of 0,060 kg, the inserts are lightweight to store and dispense at the bench alongside related vial formats. They address everyday needs for reduced-volume inserts in liquid-handling and chromatographic sample introduction workflows.
This article is part of Vial inserts, in Vials, caps & septa.
Key features
- Pack size: 100 pc(s)
- Product type: Micro-inserts
- Material: Borosilicate clear glass
- Capacity: 0,1 ml
- Tip design: Conical 15 mm tip
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about Micro-inserts, borosilicate glass,, clear glass, conical 15 mm tip, 0.1 ml
What is this article?
Micro-inserts, borosilicate glass,, clear glass, conical 15 mm tip, 0.1 ml is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Vial inserts, inside Vials, caps & septa, in Chromatography equipment.
A vial insert is a small glass or plastic cup inside a standard vial, so a few microlitres stand high enough for the needle. Volume, glass or polypropylene, and whether it has a spring or a foot are the choices. The wrong insert sits too low and the needle hits the bottom.
An autosampler vial is the small closed bottle a chromatograph picks up. The neck is crimp, screw or snap, and the cap and the septum have to be that neck. The septum is the part the needle pierces. A soft septum reseals. A septum that is wrong for the solvent swells or sheds particles into the sample. Inserts reduce the volume when the sample is scarce. The separation they feed is described with IUPAC names and PubChem data.
Which category should I open next?
The category is Vials, caps & septa. The sub-category is Vial inserts. The catalogue is Chromatography equipment.
Shelves beside this one are Vial caps & septa, Chromatography accessories, Autosampler vials and Crimpers & decappers.
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within two to five working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
