n-Hexane ROTISOLV® min. 96 % Pestilyse® plus, 2,5 l glass, Carl Roth, art. 7567.1
Carl Roth
Roll over image to zoom in Click on image to zoom
n-Hexane ROTISOLV® min. 96 % Pestilyse® plus, 2,5 l glass, Carl Roth, art. 7567.1 Carl Roth

n-Hexane, ROTISOLV®, min. 96 %, Pestilyse® plus, 2.5 l, glass

Catalog nr. 7567.1

Available

Carl Roth
Volume: 2.5 liter
Value Packs: 1 piece
Price:
€147,85
Ask quote for bulk order

Need technical support?

info@luminixhealth.com +32 13 30 43 61

Description

n-Hexane ROTISOLV® Pestilyse® plus is a high-purity aliphatic hydrocarbon solvent with a minimum assay of 96 %, intended for demanding chromatographic and GC applications. Identified by CAS number 110-54-3 and empirical formula C₆H₁₄, it has a molar mass of 86,18 g/mol and a density of 0,66 g/cm³. The boiling range is 68 to 69 °C and the flash point is −22 °C, supporting controlled handling in analytical workflows. Supplied in a 2,5 l glass bottle, this grade is formulated for pesticide-residue and related trace analyses where low background interference is essential. Physical and identity data align with EG number 203-777-6 and UN number 1208. Laboratories use n-hexane of this quality as an extraction and mobile-phase solvent in GC sample preparation and chromatographic methods. The ROTISOLV® Pestilyse® plus specification from manufacturer Carl ROTH provides a consistent solvent profile suited to routine and research GC work requiring defined purity and documented composition.

This article is part of HPLC & LC-MS grade solvents, in Solvents. See also Analytical grade solvents (p.a.).

Key features

  • Assay (GC): ≥96.0 %
  • Colour (APHA): ≤5
  • Water (KF): ≤0.005 %
  • Free acid (as CH3COOH): ≤0.002 %
  • Evaporation residue: ≤0.0001 %
  • GC/FID suitability (as 2-octanol): ≤10 ng/ml
  • GC/ECD suitability (as heptachloro epoxide): ≤10 ng/l
  • GC/ECD dioxins, furans and PCBs (as lindane): ≤5 ng/l
  • GC/ECD pesticides (as lindane): ≤2 ng/l
  • GC/NPD pesticides (as parathion): ≤5 ng/l
  • CAS number: 110-54-3
  • Pack size: 2,5 l glass
  • EG nr.: 203-777-6
  • Purity: min. 96 %
  • Molar mass: 86,18 g/mol
  • Technical Information Sheet: PDF
  • Safety Data Sheet: PDF

Need technical support?

info@luminixhealth.com +32 13 30 43 61

Compliance & Safety Information

GHS02, flammableGHS07, harmfulGHS08, health hazardGHS09, environmental hazardDanger

Hazard Statements (H-Phrases)

H225Highly flammable liquid and vapour. H304May be fatal if swallowed and enters airways. H315Causes skin irritation. H336May cause drowsiness or dizziness. H361fSuspected of damaging fertility. H372Causes damage to organs through prolonged or repeated exposure. H411Toxic to aquatic life with long lasting effects.

Precautionary Statements (P-Phrases)

P202Do not handle until all safety precautions have been read and understood. P280Wear protective gloves/protective clothing/eye protection/face protection. P303+P361+P353IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340IF INHALED: Remove person to fresh air and keep comfortable for breathing. P308+P313IF exposed or concerned: Get medical advice/attention.

Recently viewed

You may also like

Browse related categories

Category

Solvents

Sub-category

HPLC & LC-MS grade solvents

Catalogue

Lab chemicals

Brand

Carl Roth

Questions about n-Hexane, ROTISOLV®, min. 96 %, Pestilyse® plus, 2.5 l, glass

What is this article?

n-Hexane, ROTISOLV®, min. 96 %, Pestilyse® plus, 2.5 l, glass is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in HPLC & LC-MS grade solvents, inside Solvents, in Lab chemicals.

HPLC grade limits the absorbance and the residue that would appear as peaks or baseline drift. LC-MS grade goes further on metal ions and on particles that would suppress a mass spectrum. A solvent that is only analytical grade is a false economy on an LC-MS system.

A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.

Which category should I open next?

The category is Solvents. The sub-category is HPLC & LC-MS grade solvents. The catalogue is Lab chemicals.

Shelves beside this one are Analytical grade solvents (p.a.), Dry & deuterated solvents (NMR, synthesis), Technical & synthesis grade solvents and Green & alternative solvents.

What should I check before I order?

The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?

The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.