Description
PCB Solution ROTI®Star is a concentrated multi-congener reference mixture containing eight polychlorinated biphenyls at 100 µg/ml in n-hexane. The set covers PCB 28, PCB 52, PCB 101, PCB 118, PCB 138, PCB 153, PCB 180 and PCB 194 for environmental residue analysis and gas chromatography. Delivered as 1 ml in a glass ampoule, the solution has a density of 0,66 g/cm³, a flash point of −22 °C and a boiling range of 68 to 69 °C. This higher-strength preparation from manufacturer Carl ROTH is useful for preparing dilution series, fortification solutions and stock standards in PCB monitoring programmes. The n-hexane matrix aligns with established extraction and clean-up procedures applied to environmental samples. Laboratories can generate intermediate and working standards from a single ampoule while maintaining defined congener ratios. The product supports chromatography-based determination of priority PCBs in soil, sediment, water and related matrices where reliable multi-level calibration is required.
This article is part of HPLC & LC-MS grade solvents, in Solvents. See also Analytical grade solvents (p.a.).
Key features
- PCB 28: 100 µg/ml
- PCB 52: 100 µg/ml
- PCB 101: 100 µg/ml
- PCB 118: 100 µg/ml
- PCB 138: 100 µg/ml
- PCB 153: 100 µg/ml
- PCB 180: 100 µg/ml
- PCB 194: 100 µg/ml
- Pack size: 1 ml glass ampoule
- Density: 0,66 g/cm³
- Boiling point: 68 to 69 °C
- Concentration: 100 µg/ml
- Solvent: n-hexane
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information



DangerHazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Browse related categories
Category
Sub-category
Catalogue
Brand
Questions about PCB Solution ROTI®Star, 8 PCBs 100 µg/ml in n-hexane, 1 ml, glass ampoule
What is this article?
PCB Solution ROTI®Star, 8 PCBs 100 µg/ml in n-hexane, 1 ml, glass ampoule is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in HPLC & LC-MS grade solvents, inside Solvents, in Lab chemicals.
HPLC grade limits the absorbance and the residue that would appear as peaks or baseline drift. LC-MS grade goes further on metal ions and on particles that would suppress a mass spectrum. A solvent that is only analytical grade is a false economy on an LC-MS system.
A solvent dissolves. The grade says which impurities are low enough for the method. Analytical grade is the ordinary pure solvent. HPLC and LC-MS grades limit the absorbance and the ions that would become peaks or background. A dry solvent has had water removed. A deuterated solvent is for NMR, where the hydrogen signal would otherwise drown the sample. Technical grade is for cleaning and for synthesis that does not need a chromatogram. Identity is on PubChem. Names follow IUPAC. Hazards follow ECHA, the CLP Regulation and REACH.
Which category should I open next?
The category is Solvents. The sub-category is HPLC & LC-MS grade solvents. The catalogue is Lab chemicals.
Shelves beside this one are Analytical grade solvents (p.a.), Dry & deuterated solvents (NMR, synthesis), Technical & synthesis grade solvents and Green & alternative solvents.
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.


















