Potassium dichromate, min. 99.5 %, p.a., ACS, ISO, 500 g, plastic

Catalog nr. P744.3

Available

Carl Roth

Volume: 100 g
Value Packs: 1 piece
Price:
Sale price€37,55
Ask quote for bulk order

Description

Potassium dichromate is a high-purity inorganic salt supplied at min. 99,5 % and graded p.a., ACS and ISO for demanding analytical work. With the empirical formula K₂Cr₂O₇, CAS number 7778-50-9 and EG nr. 231-906-6, it has a molar mass of 294,18 g/mol and a density of 2,68 g/cm³. This reagent is widely used in volumetric analysis, oxidation reactions and as a reference material in inorganic and wet-chemical laboratories. supports routine preparation of standard solutions and controlled handling of the solid. Manufactured by Carl ROTH, the material meets established p.a., ACS and ISO quality expectations for salts intended for analysis. Its defined composition and physical data make it suitable for calibration, method development and general laboratory oxidation chemistry where consistent dichromate content is required. Suitable for research, quality control and teaching laboratories that specify ACS- or ISO-grade potassium dichromate.

This article is part of Volumetric standard solutions (titration), in Analytical standards & reference materials.

Key features

  • Assay (iodom.): ≥99,5 %
  • In H2O insoluble matter: ≤0,005 %
  • Loss on drying (105 °C): ≤0,05 %
  • Chloride (Cl): ≤0,001 %
  • Sulphate (SO4): ≤0,005 %
  • Lead (Pb): ≤0,005 %
  • Calcium (Ca): ≤0,002 %
  • Iron (Fe): ≤0,001 %
  • Copper (Cu): ≤0,001 %
  • Sodium (Na): ≤0,02 %
  • CAS number: 7778-50-9
  • Pack sizes: 500 g, 1 kg, 100 g
  • EG nr.: 231-906-6
  • Purity: min. 99,5 %, p.a., ACS, ISO
  • Molar mass: 294,18 g/mol
  • Density: 2,68 g/cm³
  • Technical Information Sheet: PDF
  • Safety Data Sheet: PDF

Compliance & Safety Information

GHS03, oxidisingGHS05, corrosiveGHS06, toxicGHS08, health hazardGHS09, environmental hazardDanger

Hazard Statements (H-Phrases)

H272May intensify fire; oxidiser. H301Toxic if swallowed. H312Harmful in contact with skin. H314Causes severe skin burns and eye damage. H317May cause an allergic skin reaction. H330Fatal if inhaled. H334May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335May cause respiratory irritation. H340May cause genetic defects. H350May cause cancer. H360FDMay damage fertility. May damage the unborn child. H372Causes damage to organs through prolonged or repeated exposure. H410Very toxic to aquatic life with long lasting effects.

Precautionary Statements (P-Phrases)

P202Do not handle until all safety precautions have been read and understood. P270Do not eat, drink or smoke when using this product. P302+P352IF ON SKIN: Wash with plenty of water. P304+P340IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310Immediately call a POISON CENTER/doctor.

Recently viewed

You may also like

Questions about Potassium dichromate, min. 99.5 %, p.a., ACS, ISO, 500 g, plastic

What is this article?

Potassium dichromate, min. 99.5 %, p.a., ACS, ISO, 500 g, plastic is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in Volumetric standard solutions (titration), inside Analytical standards & reference materials, in Lab chemicals.

A volumetric standard solution is a reagent of stated concentration for titration, such as a stated molarity of acid, base or silver nitrate. The factor or the exact titre is on the certificate. Using the nominal molarity when a factor is printed is a systematic error.

A reference material is the article against which another result is compared. Its value is stated, and the uncertainty of that value is part of the product. An ICP or ion standard is a solution of known concentration. A volumetric standard is for titration. A chromatography standard is the peak you match. The grade names, including pharmacopoeia and ASTM, say which impurities were limited. Identity is checked on PubChem. Names follow IUPAC. Medicinal grades follow the European Pharmacopoeia and USP.

Which category should I open next?
What should I check before I order?

When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.

How does ordering and shipping work?

We deliver across the EU, usually within 2 to 5 working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.

Which other categories should I open?