Description
Yttrium ICP Standard Solution is a single-element calibration standard in the ROTI®Star range, prepared at 10000 mg/l Y for atomic spectroscopy. It is intended for ICP-OES, ICP-MS and related spectrometric methods where a reliable yttrium reference concentration is required for calibration, method verification and quantitative elemental analysis. The solution has a density of approximately 1 g/cm³ and a boiling point above 83 °C, and is assigned UN number 2031. Supplied as a 100 ml unit, the pack size suits routine laboratory workflows in spectroscopy and spectrometry without unnecessary excess volume. This standard from manufacturer Carl ROTH supports single-element ICP work within atomic spectroscopy applications, helping laboratories establish consistent yttrium response factors and maintain traceable calibration series. Concentration, density and boiling-point data follow the manufacturer description so the solution can be integrated directly into existing ICP-OES and ICP-MS protocols for yttrium determination in research, quality control and analytical service environments.
This article is part of ICP, AAS & ion standards, in Analytical standards & reference materials.
Key features
- c (Y) as Y2O3 in 3 % HNO3: 10000 mg/l
- Pack size: 100 ml
- Density: ~1 g/cm³
- Boiling point: >83 °C
- Brand: ROTI®Star
- Concentration: 10000 mg/l Y
- Technical Information Sheet:
- Safety Data Sheet:
Compliance & Safety Information
DangerHazard Statements (H-Phrases)
Precautionary Statements (P-Phrases)
Recently viewed
You may also like
Browse related categories
Category
Analytical standards & reference materials
Sub-category
Catalogue
Brand
Questions about Yttrium ICP Standard Solution, ROTI®Star, 10000 mg/l Y, Density (D) ~1 g/cm³
What is this article?
Yttrium ICP Standard Solution, ROTI®Star, 10000 mg/l Y, Density (D) ~1 g/cm³ is the article on this page. Luminix Health distributes Carl Roth for laboratory use. It sits in ICP, AAS & ion standards, inside Analytical standards & reference materials, in Lab chemicals.
An ICP, AAS or ion standard is a solution of a stated element or ion at a stated concentration, with an uncertainty. It is the calibration point of a spectrometer or an electrode. The matrix, often dilute acid, has to match the method. A standard past its expiry is not that concentration.
A reference material is the article against which another result is compared. Its value is stated, and the uncertainty of that value is part of the product. An ICP or ion standard is a solution of known concentration. A volumetric standard is for titration. A chromatography standard is the peak you match. The grade names, including pharmacopoeia and ASTM, say which impurities were limited. Identity is checked on PubChem. Names follow IUPAC. Medicinal grades follow the European Pharmacopoeia and USP.
Which category should I open next?
The category is Analytical standards & reference materials. The sub-category is ICP, AAS & ion standards. The catalogue is Lab chemicals.
Shelves beside this one are Chromatography standards (GC, HPLC, pesticides), Reference substances & reagents (other), Volumetric standard solutions (titration), Reagents for analysis (Ph. Eur., ASTM, DIN), Spectroscopy & physical property standards and Indicators & indicator solutions.
What should I check before I order?
The technical information on this page is the manufacturer's sheet. Read that, not a rewritten specification.
When this page shows a safety data sheet, use that manufacturer file. Hazard text does not belong in the sales description. For a pack size, a grade or a certificate that is not on the page, send a quote request or contact the team.
How does ordering and shipping work?
We deliver across the EU, usually within two to five working days. More is on Delivery across the EU. The terms are in the Shipping Policy. The full brand index is on shop by brand. Who we are is on about us.
Which other categories should I open?
The seven catalogues are Labware, Lab chemicals, Lab instruments, Lab consumables, Chromatography equipment, Lab safety equipment and Life Science & Microbiology.
